Feature

●SS-5 (RED)/ 20 PCS /AWG 18-10 / Product Dimensions H : 50 ØD : 17 / Temperature Rating: -40° to 105°C / Voltage Rating: 600 Volts
●Distinction 1. (Efficiency): Shrink tubing shrinks to 4:1 ratio. Product numbers are printed on tubes for quick and easy size selection. A strong adhesive tubing prevents wires from being loose due to shaking or pulling. Copper to copper connections only.
●Distinction 2. (Safer): We produce a waterproof wire connector with an integrative twist-on wire connector and adhesive-lined shrink tubing. Shrinks tubing and leaked silicon cover wires, then it has extra waterproof effects.
●Distinction 3. (More Reliable): Our waterproof wire connector is RoHS Compliant. / We applied and complied RoHS testing to protect our customers safe and earth’s environment.
●Do not recommend heating the connector part. It could melt the wire connector. Try to heat the shrink-tubing part evenly.
●Guarantee: Our outdoor waterproof electrical connectors provide a much more competitive and distinctive effect than others. It is a high-quality waterproof wire connector. Changing small tools will lead you to prevent further disasters. Choose the extra safe waterproof wire connector for sprinkler wiring and outdoor landscape light wiring.

[SS-3   & Orange  & 30pcs]




[SS-1   & Gray  & 100 pcs]




[SS-5   & Red  & 20 pcs]




[SS-2   & Bule  & 50 pcs]




[SS-4   & Yellow  & 20 pcs]





Description

Giantlok Waterproof Wire connector: SS-5 (RED)/ 20 PCS /AWG 18-10

Product Dimensions H : 50 D : 17 Temperature Rating: -40 to 105 C Voltage Rating: 600 Volts

Made in Korea / IP 66

Application: Industry, Indoor and outdoor landscape lighting wire, underground wire, house wire, automobile, boating wire This connector is suitable for indoor and outdoor electrical wire splices, especially those exposed to water, wet and corrosive environments.

Instruction:

1. Use a wire stripper machine to strip the ends of both wires you want to connect (about 0.4 inch ~ 0.5 Inch ).

2. Select a connector that is suitable for the wires. Line up the two wires and make them parallel.

3. Insert the wire in the connector.

4. Twist the connector to a clockwise direction until it feels very tight.

5. Use a torch or lighter to heat the tubing part evenly to finish (Caution: Do Not heat the Connector Part).

6. Completely shrink the tubing to finish it.