Feature

●Widely Used: Used for water supply pipelines, cable pipelines, pipeline vacuum systems, industrial pipelines, underground pipeline construction, underground cave exploration, underwater research and other exploration work.
●Waterproof And Durable: Made of ABS, aluminum, steel material, waterproof and durable. The transmitter and receiver are integrated detectors, transmitter is non rusting steel lagging process, waterproof and smashproof.
●Built In Induction Coil: The receiver has a built in induction coil to receive magnetic signals from the pipe, and the coil generates an induced current to calculate the direction and position of the transmitter.
●Led Display: With an led display, you can view the monitoring data more clearly, conveniently and practically. With high power speaker, earphone answering function, removable antenna.
●Efficient: Using the 512Hz transmitter, the position of the probe can be easily determined. Save time and money.


Description

Specification:
Item Type: Pipe inspection receiver
Material: ABS, aluminum, steel
Weight: Approx. 2355g / 83.1oz
Detector camera locator:
Operating frequency: 512Hz
Modulation: None
Battery: 6 AA alkaline batteries (shipped without batteries)
Usage Time: 4 hours intermittent use
Audio Output: 50-1000Hz determined by signal strength
Operating temperature: -20°C to 60°C
Product Length After Assembly: 53cm / 20.9in
Sensor: Separate angle sensor to obtain peak and zero signal
Transmitter:
Diameter: 23.5mm / 0.9in
Length: 73mm / 2.9in
Probe Frequency: 512Hz
Battery: 1xAAA (shipped without battery)
Interface: 1/4-20
Process: Gluing process, waterproof and antismash

How to Use:
Overall layout Turn on Turn off (long press to turn on, Long press off) near far switch controls overall sensitivity. The far position is recommended when starting to locate the probe. When you are Near the transmitter and the meter is at full scale and you cannot reduce the sensitivity any further, switch to Near to find out its exact location.
Meter indicator: Indicate peak signal (right) and zero signal (left).
Speaker: Allow you to hear the transmitters signal beep or continuous sound, depending on the transmitter use case.
Battery indicator: Display the health status of the battery.
Instructions: Adjust the locator near far switch and signal ＋ － according to the actual environment, so that the locator better match the transmitter. It is recommended to set to Far mode at the beginning (Signal set to 9). When the LED screen shows a very strong signal, reduce the signal sensitivity level (at the same time, louder sound can be heard), and then narrow the detection range.

Package List:
1 x Host
1 x Transmitter
1 x Transmitter Connector
1 x Antenna
1 x Earphone
2 x Manual
1 x Aluminum Box