Feature

●Spit the amount of plastic adjustment range: 0 ~ 999.9
●Back to the amount of plastic adjustment range: 0 ~ 400
●Minimum throughput: 0.0001ml
●Use Material Viscosity: 10000cps or less Dimensions: 188 * 168 * 88mm Power consumption: 30W Power supply: 110 / 220V 60 / 50Hz
●Discharge mode: stable action mode (quantitative discharge), manual control mode


Description

Method of operation
Manual mode
1. The 410-type instant glue dispenser power cord is connected, and power, the switch switch to the MAN position, instructions light
2. Install the tube
3. Set the forward and reverse press CW CCW key to switch, we select CCW key to convert, we selected CW - clockwise
4. Set back to the suction VAC.ADJ Shun conveyed, reverse the small to choose the required value, with the manual mode the best reversal off the suction
5. Adjust the DIS, ADJ knob, set the best speed (working the best speed of 50 ~ 120RAM)
6. Press the "SHOT" key or the manual switch to complete the job
Automatic mode
1. Set the diverter switch to the TIME position
2. Use the DISPENSE TIME key to set the dispensing angle
3. Press the above manual mode 2,3,4,5,6 program