1. [3 Phase Input and Output] Our vector inverter is intelligent and efficient, with 3 phase 380?440V input, 3 phase 0?440V output, 2.2KW, and 5.1A output current.
2. [RS485 Communication and Digital Display] The inverter has humanized keyboard design, digital display with RS485 communication, and built in braking unit, which can be externally connected with braking resistor for emergency stop brake.
3. [Full Patch Design and Protection] All internal components are designed with patch, increasing the stability of the machine and strong protection performance.
4. [Good Heat Dissipation] Our inverter has a large heat sink with a small fan, and the small fan ensures low noise while assisting good heat dissipation.
5. [Made of ABS Plastic] This vector inverter is made of industrial ABS plastic, high impact resistance, high heat resistance, flame retardant and good overall performance.
Specification:
Item Type: Frequency Converter
Material: ABS
Storage Temperature: -25℃-+55℃
Input Voltage: 3 Phase 380?440VAC
Output Voltage: 3 Phase 0?440VAC
Output Current: 5.1A
Braking Resistance:
Braking Resistor Power: 300W
Braking Resistor Resistance Value: 250Ω
How to Use:
1. Before wiring, make sure that the input power is disconnected.
2. Wiring should be done by professional electrical engineers.
3. Be sure to ground the grounding terminal.
4. After wiring the emergency stop circuit, make sure to check if the operation is effective.
5. Do not connect the output line of the inverter to the housing, and do not short circuit the output line.
6. Make sure that the voltage of the AC main circuit power supply is the same as the rated voltage of the inverter.
7. Do not perform voltage withstand test on the inverter.
8. Connect the braking resistor according to the wiring diagram.
9. Do not connect the power cable to the output U, V, W terminals.
10. Do not connect the contactor to the