Feature

●[Emergency Stop] The frequency inverter has built in brake unit, which can be connected with an external brake resistor for emergency stop braking.
●[Fast Heat Dissipation] Frequency converter is with cooling fan, which has fast heat dissipation and low noise, improving the stability and service life.
●[Excellent Component] Frequency inverter adopts original chip and excellent capacitor, the circuit board uses special protective paint, dust, dirt and alkali resistant, making the performance more stable.
●[User Friendly] Motor variable frequency drive is designed with humanized keyboard and digital screen, which is clearer to observe and more convenient to operate.
●[RS485 Communication] The converter provides one RS485 interface, and uses standard communication protocol. You can read and write through computers, PLC and other communication devices.


Description

Specification:
Item Type: Variable Frequency Drive
Material: Flame Retardant ABS
Power: 15KW
Applicable Motor Power: 15KW
Input: AC 3PH 380V 50 60Hz 29A
Output: AC 3PH 380V 0-300Hz 24A

How to Use:
1. For data frames in ASCII format, if frame length is even, frame will be discarded.
2. The same function settings of multiple multi function input terminals will cause to functional disorder, which should be avoided when users modify the multi function terminal functions through protocol.
3. Some parameters have negative values, such as analog output torsion ?200.00 to +200.00. When the output torsion is 0, the data read by the communication is 0. When the input is ?0.01, the data read is 65535. When the input is ?200.00, the data read is 63536. When the data is negative, the maximum value is 65535, and the minimum value decreases in turn.

Package List:
1 x Variable Frequency Drive
1 x User Manual

Note:
1. Before wiring, please confirm whether the input power supply is powered off.
2. The wiring operation shall be carried out by professional electrical engineering personnel.
3. The grounding terminal must be grounded.
4. After the emergency stop circuit wiring is completed, be sure to check whether the action is effective.
5. The output line of the frequency converter must not be connected with the housing, and the output line must not be short circuited.
6. Please confirm whether the voltage of AC main circuit power supply is consistent with the rated voltage of frequency converter.
7. Do not carry out voltage withstand test on the frequency converter.
8. Please connect the braking resistor according to the wiring diagram.
9. Do not connect the power cord to the output U, V, W terminals.