[One Size]
Package: 4pcs/set
Installation:
Note.The temperature of the car and sticker surface should be more than 15 degrees!!!
If the weather is cold, please use a hairdryer to heat the car and sticker surface.
1.Skimp the surface (alcohol, gasoline)
2.Wipe dry with a clean cloth.
3.Apply double-sided tape on the overlay or threshold (if already applied)
4.Unglue the protective film of the Scotch tape
5.Heat with a hair dryer (construction or conventional) Scotch to strengthen its adhesive qualities.
6.Press the overlay or threshold to the selected place (pre-making sure the temperature is above 15 degrees)
7.To achieve maximum gluing recommended after installation influence hot air flow with a hair dryer with outside
threshold, when this pressing threshold for 3-5 minutes. In the case of a plastic pad, heating can cause damage to the chrome coating.
"Bubbles" can show up even after a while. To avoid this, do not allow overheating of plastic.
Dear customers, our store focus on selling high quality auto exterior accessories, professional to provide you with good products and services, hope you have a happy shopping, thank you.