Spurtar 7 pin 7-way trailer round plug lets you connect your trailer to the 7 -way round blade connector of a tow vehicle Interlock system locks and ensures secure and stable connections. A 7-pin trailer plug connects your vehicle with the trailer to provide power for the required lights, turn signals, brake power, battery hot lead, reverse lights, and ground.
The 7-Way Trailer Plug is around 2″ diameter connector that allows an additional pin for an auxiliary 12-volt power or backup lights. It is usually used for towing a heavy-duty landscaping trailer, car trailer, equipment trailer, horse trailer, dump trailer, travel trailer, construction trailer, and larger trailers.
|
|
|
---|---|---|
Heavy Duty Construction
|
Useful Towing Equipment
|
Practical Over-sized Finger Tabs
|
A bad ground connection is one of the most common causes for trailer wiring problems. A bad ground can show up as an overall lighting failure, even when the voltmeter says you have a charge. It can also create intermittent failure, causing your lights to flicker randomly. When mounting a ground wire, choose an existing factory ground connection where other ground wires are connected or use a bolt to mount the wire directly to your vehicles chassis.
Note: Going with larger gauge wire (10 is usually the largest you will see for trailer wiring harnesses and connectors) can lead to a level of resistance that will cause some functions not to work properly.
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
|
---|---|---|---|---|---|---|
Toolwiz Tire Chuck 2 pcs Air Chuck 1/4 Inch Brass Tyre Valve | Spurtar Automatic Tire Deflator, 6-30 PSI Tyre Deflator Kit | Spurtar 25-inch Telescoping Lug Nut Wrench Wheel Brace | Spurtar Lug Wrench Extendable Wheel Brace Lugs Wrench | Heavy Duty CV Boot Clamp Pliers Joint Tool Ear-Type Clamp | Hose Clamp Pliers Heavy Duty Auto Repairing Tool Flat Pliers | |
Material | Solid Brass | Solid Brass | Carbon Steel | Carbon Steel | Stainless Steel | Carbon Steel |
Fit Size | 1/4" ID Air Lines | 6-30 PSI | (17/19MM) & (21/23MM) | (17/19MM) & (21/23MM) | 1/2" Drive | Max opening 1.38in(35mm) |
Application | Compatible with 6mm bore hose, suitable for vehicle tire inflator, such as car, Vans and truck, etc. | Fits for Tires, Car, Truck, Motorcycle, Jeep and ATV | Compatible with all vehicle types to easily undoes or fixes wheel nuts | Compatible with all vehicle types to easily undoes or fixes wheel nuts | Perfect Tool for Ear-Type Clamp Crimping or Removal | Easily to remove and install flat-type or ring-type hose clamps |