How to Use:
2. Insert 2 x 1.5VAA batteries (not included) as shown in the picture, then reattach the battery cover. Or plug the USB data cable into the Type C socket and supply power through the DC5V power adapter. Note: Use only non rechargeable batteries.
4. Raise the spindle to the fully extended position and place the spool on the spindle.
5. Following the numbers and direction arrows, pass the thread between the eyelet and the two clips of the suture tension disc. Pass the end of the thread through the hole in the bobbin, insert the bobbin into the winding shaft, and turn the bobbin slightly until the spring on the shaft snaps into place
6. Make sure the bobbin bar is installed between the top and bottom rims of the bobbin.
7. Press the "ON" button to start. Winding stops automatically when the bobbin is full. If you want to adjust the winding amount of the bobbin by yourself, press "ON" when the winding automatically stops. Keep pressing the key until you need to release the "ON" key.
Package List:
1 x Electric Winding Machine
1 x English User Manual