Specification:
Item Type: Angle Block
Material: Manganese steel
Type: 3in x 3in x 1/4in 45°/45°/90°
2in x 3-3/8in x 1/4in 30°/60°/90°
Package List:
2 x Angle Block
Note:
1. Before the measurement, the measuring surface of the gauge and the measured surface of the part should be cleaned to avoid the measurement accuracy due to the presence of dirt. Using accuracy measuring tools such as vernier calipers, centimeters and dial gauges to measure forging blanks, or surfaces with abrasives (such as silicon carbide, etc.) is wrong, which makes the measuring surface wear out quickly and loses precision.
2. The gauge is a measurement tool and should never be used as a substitute for other tools. For example, taking a vernier caliper, taking a square ruler as a small hammer, taking a steel ruler as a screwdriver, and using a steel ruler to clean the chips are all wrong. It is also wrong to put the gauge as a toy, such as holding the percentile in the hand, or waving it. It is easy to make the gauge lose accuracy.
3. During the use of the gauge, do not stack with tools, tools such as boring tools, boring heads, turning tools and drill bits to avoid the impact gauge. Also, dont just put it on the machine to avoid damage to the gauge due to machine vibration. In particular, vernier calipers, etc., should be placed in a special box to avoid deformation of the ruler.
4. If the gauge is abnormal, if the surface of the gauge is uneven, there are burrs, rust spots and scales are not allowed, the scale is bent and deformed, the activity is not flexible, etc., the user should not disassemble it himself, and it is not allowed to use the hoe itself. Knocking, slashing, sanding, etc., rough repairs, so as not to increase the gauge error