Feature

●Made of manganese steel material, high hardness and not easy to break
●Suitable for all types of angle measurement
●Professional design, the angle block can provide accurate measurement
●Including 2pcs different angle blocks, can meet your needs
●There is a box which you can store and convenient to carry


Description

Feature:

1. Made of manganese steel material, high hardness and not easy to break
2. Professional design, the angle block can provide accurate measurement
3. Including 2pcs different angle blocks, can meet your needs
4. There is a box which you can store and convenient to carry
5. Suitable for all types of angle measurement

Specification:

Item Type: Angle Block

Material: Manganese steel
Type: 3in x 3in x 1/4in 45°/45°/90°
2in x 3-3/8in x 1/4in 30°/60°/90°

Package List:

2 x Angle Block

Notice:

1. Before the measurement, the measuring surface of the gauge and the measured surface of the part should be cleaned to avoid the measurement accuracy due to the presence of dirt. Using accuracy measuring tools such as vernier calipers, centimeters and dial gauges to measure forging blanks, or surfaces with abrasives (such as silicon carbide, etc.) is wrong, which makes the measuring surface wear out quickly and loses precision.

2. The gauge is a measurement tool and should never be used as a substitute for other tools. For example, taking a vernier caliper, taking a square ruler as a small hammer, taking a steel ruler as a screwdriver, and using a steel ruler to clean the chips are all wrong. It is also wrong to put the gauge as a toy, such as holding the percentile in the hand, or waving it. It is easy to make the gauge lose accuracy.

3. During the use of the gauge, do not stack with tools, tools such as boring tools, boring heads, turning tools and drill bits to avoid the impact gauge. Also, dont just put it on the machine to avoid damage to the gauge due to machine vibration. In particular, vernier calipers, etc., should be placed in a special box to avoid deformation of the rule