Feature

●Made of industrial?grade soft rubber, wear?resistant and durable. Dustproof, anti?fall, waterproof, safety protection, no fear of environmental challenges.
●Made of industrial?grade soft rubber, wear?resistant and durable. Dustproof, anti?fall, waterproof, safety protection, no fear of environmental challenges.
●Coated lens, the measurement target is clearer, and the tripod connection hole makes the measurement more stable and convenient.
●Integrated body shell, the body is made of ABS + PC material, non?slip, drop resistant, and comfortable to touch.
●High?definition eyepieces, manual focusing, both nearsighted and presbyopia can be observed with naked eyes.
●Continuous measurement, two?point height measurement, a new method of distance measurement in seconds.


Description

How to Use:
Power button: when it is not turned on, it is used as the power?on button; after power?on, short press is used as the measurement start button and measurement end button (scan mode).
MODE key: After pressing the power key to turn on the display interface, the mode can be switched by continuous short press.
Unit switching: Press the power button and MODE button for 0.5 seconds at the same time to switch the unit.
Angle calibration: Long press the power button to start calibration, the angle will flash at 0°0 once every second, put the rangefinder on a horizontal tabletop or a tripod whose horizontal angle has been adjusted, and press the MODE button to complete the calibration.

Specification:
Item Type: Rangefinder
Material: ABS + PC
Laser Safety: CLASS1 (Level 1) Laser Wavelength 905 Nm
Battery: 1 x 1000mAh CR2 Battery (Delivered With Battery)
Telescope Magnification: 6X
Measurement Error: ± 0.5m
Exit Pupil Diameter / Distance: Approx. 3.8mm
Working Temperature: -20 ~ +60℃
Lens Material: Multi-Layer Optical Coating Glass Lens
Weight: Approx. 346g / 12.2oz

Package List:
1 x Rangefinder
1 x Storage Bag
1 x Anti-Slip Rope
1 x Data Line 
1 x Lens Cleaning Cloth
1 x Manual 

Note:
1. Please do not observe the sun through the eyepieces, the focused sunlight may cause permanent damage to the eyes, and may also cause irreversible damage to the internal optical sensitive devices.
2. Avoid placing the instrument below ?20°C or above +60°C, causing damage to the instrument.
3. If there is no operation within 20s, the system will automatically shut down, please do not long press the power button.
4. Do not observe through the glass.