Adjust To The Point You can lower it with a screwdriver and put the string back, retuning it to the desired note, and strum it hard until it buzzes on the open, then raise it one or two quarter turns from the point where it buzzes. Just Adjust It!
|
Amazing Tone Easy Install Easy adjustment for different strings sizes and step down tune,some even put a little oil so where the strings sit and keep in tune.If you like low action strings, and this nut is one important part to consider. Just Consider It!
|
High Valve for Choice The brass will give a nice smooth sustain, much better than the plastic.Its a good replacement than the expensive nut files.And the brass has a solid connection to the neck and doesnt hurt sustain despite the moving parts. Just Choose It!
|
Expecillay for The Gibson Someone share that if you have a Gibson head stock is that the strings are not straight, and since the screws move under tension, the string spacing is affected (D and G get closer). You can solve this problem by installing a "string butler" to line the strings up straight and make it awesome. This is also an improvement over the diagonals nut slots that come on Gibsons and can cause difficult tuning issues. Just Solve It!
|