Comes with Pigment Kit (6 colors/ .25 ounce each) for the perfect match! With 2oz of MEK-925. White Gel Coat to be used over fiberglass surfaces. This product is designed to cure to a tack-free finish. Restore scratch on boats, canoe, kayaks, bathtub, skate board, with clear or use coloring agents.
Features:
?? Contains No-Wax Hardener included Approximate Coverage 20 sq. ft.
?? Polyester Gel-Coat White Waxed One Gallon Iso Polyester base.
?? UV stabilized for durable weather properties.
?? Use no less than 1/2 % MEKP, no more than 2% MEKP. Mix thoroughly for 2 minutes.
?? Pot life is approximately 15-25 minutes at 77 degrees Fahrenheit. Do not use under 60 degrees Fahrenheit.
?? Complete cure is approximately 45 minutes to 4 hours.
Method:
?? Clean surface and wipe clean with a dry rag.
?? Sanding is required between coats where applicable.
?? Apply with a Roller or Brush or cup gun application. Apply approximately 20 mils, approximately the thickness of a dime, of gel coat.
?? One gallon of gel coat paste will cover between 40-80 square feet at 20-25 mils.
?? May add up to 4 % pigment, normally 1oz. per quart, or 4oz. per gallon by volume.
?? May be thinned with Styrene, adding no more than 10% by volume. Clean up with Acetone.
Benefits:
It is a popular material to use when restoring shine to older fiberglass. No wax gelcoat is used when multiple layers of coats are used on a single task. This speeds up the process. However, the last gelcoat must have wax. The non-wax gelcoat will remain sticky until the wax is added. These have to be filled up several times, as the material is subject to shrinkage during curing.
High-quality products are usually slightly cheaper especially when purchased in larger quantities. Get Professional maintenance, ideal with polishing, coloring and as sealant.
Buff and polish your new gel coat to a professional finish.