Features of APM6W:

• Rockville APM6W 6.5" 2-Way 350 Watt Active/Powered USB Studio Monitor Speakers in White (Pair)
• RMS: 175 Watt
• Two-Way Active Studio Monitor Speaker System
• Quad Amp Design: Each Driver Features Frequency Specific Independent Amplifiers
• Enclosure is made of top quality MDF wood. Our enclosure is not particleboard, it is true high-grade MDF! The enclosure is 0.5” thick while the front board of it is a full 1” thickness to give you the ultimate best sound quality!
• Comes in 3 enclosure finish options Wood finish painted black. Wood finish painted white. Wood finish with vinyl front board
• We use “baking paint” made for wood surface. It lasts long and is the best paint for speakers!
• Beautiful finish is matte with a slight shine to it. Our designers spent a lot of time on the color to make it beautiful and elegant looking to improve the appearance of your studio or room
• The enclosure is built with the perfect amount of air space to maximize sound quality for a studio
• The port is built to the perfect spec to enhance the sound
• Full Range Class “D” Amplifier Circuitry with Auto-Switching Power Supply
• LED Power on Indicator on Rear Panel
• Ferro Fluid Enhanced 1.5" Neodymium Silk Dome Tweeter With Metal Grill Protection
• Tweeter has 1” voice coil diameter
• Curved Front Bezel Design Eliminates Standing Wave Distortion
• Injection Molded Polypropylene Cone Woofer
• Rubber woofer surrounds increases sound and eliminates unwanted distortions
• Computer Optimized Electronic Crossover Network Supplies Amazing Sounding Highs, Lows, and Mids
• Rear-Firing Port Shaped and Designed by Sound Engineers to Reduce Port Turbulence and Deliver Distortion Free Top Sound Quality!
• We developed the Most Optimized Magnet structure, Cone, and Cabinet Space that Reproduces the Sound to Play Back Exactly the Way it was Recorded!
• Specially Wound Voice Coils Produce Accurate Response along Entire Frequency Spectrum
• Distortion-Free Playback Even at Max Volume Listening! Very Clean Sound!
• Our factory uses the latest Precision Glue Machine (Over 500 meter Tunnel Oven). To put it in simple to understand terms; the glue on speakers is of the upmost importance. If the glue does not hold up, the speaker is done. We use the latest machinery to manufacture these speakers. The SPL of the speaker goes up when you use better glue and a better machine the secure the glue in place
• Thick “Wadding” protects inside the speaker cabinet ? Wadding is a white chemical silk type of material that we put inside the speaker cabinet for multiple reasons. It helps to make the sound come out more clearly, and it also protects all the parts inside the speaker. This material is also a fire retardant. This is unique to our speakers. Most other brands do not take this step due to the cost of the material, but it is a game changer!
• World-class top of the line audiophile grade components! We use ADAU 1701 for audio processing and TPA3116 for amplification. These are both known to be best in class circuit designs. These components also are amazing and allow us to adjust the sound via soft programing on a computer during the design stage to get the perfect sound. ADI and TI are the names of the makers of these IC’s. Most people do not know brands that make circuits, but these are famous in that industry and known to be the best of the best. Only very high end products use these components
• 110 Volt compatible with SMPS technology ? Normally most items have a transformer. Our SMPS technology switches voltages more efficiently and adheres to all international efficiency standards!
• Every Speaker in Production Undergoes a Computer Generated Sound Check Test to Ensure it Upholds to our Specifications and Standards

_________________________________________________________________________________________________________________________________________________________________

Recommended Applications Of RockMix 2:

• Two Person Live Stream/recording (Zoom, podcast, etc)
• One instrument and one singer who wants to record or live stream or perform live

Features Of RockMix 2:

• Rockville RockMix 2 Channel Mic+Instrument Pro Recording Mixer with USB Recording Interface
• Switchable +48v Phantom Power on both channels for use with condenser microphones
• Channel 1 and Channel 2: XLR and ¼” TRS combo input jacks
• Channel 1 is a microphone channel
• Channel 2: mic/instrument level switchable allowing you to connect a mic, instrument, or any other audio device
• Independent Level Controls for Main and Headphone/Monitor Outputs
• Integrated Plug-and-Play USB Audio Interface for Mac & PC
• USB Interface will send the master output in stereo to your DAW so you can record and/or stream your mix
• Operates on USB BUS Power or 5V DC External Power Supply (Included)
• Low power consumption means you can power the mixer from the USB of your laptop or by plugging it into an outlet or through a standard 5V powerbank
• Super mini 2-channel mixing console designed for home studio recordings or live broadcast streaming
• RCA (L&R) outputs allow you to send the master output to an amplifier, powered speakers, recording device, etc
• 3.5mm headphone output
• Additional 3.5mm mic input allow you to connect an additional microphone in addition to the 2 main channels
• Each channel has a 2-band EQ to customize the sound
• Each channel has pan and level controls
• USB playbck switch assigns the signal to the MAIN MIX or MONITOR
• Monitor/headphone level control knob
• Main mix level control knob
• No external drivers are needed for mac or PC

_________________________________________________________________________________________________________________________________________________________________

Features of PRO-M50:

• Rockville PRO-M50 Studio Headphones w/ Detachable Coil Cable, Case+Extra Ear Pad
• Professional High-Definition Studio Headphones
• 40mm Neodymium drivers
• Ergonomically designed swivel ear cups
• Supreme sound isolation
• Accurate sound reproduction
• Minimal bleed
• Sturdy and durable steel headband and arms
• Soft leather headband cover
• Interchangeable leather and soft suede ear cups covers included
• Detachable 51” coil cable made of 100% Oxygen Free Copper (158” fully extended)
• Gold plated 3.5mm connector
• Gold plated ¼” adapter
• Hard leather carrying case
• Stainless steel headband frame and moving arms are durable and long-lasting

_________________________________________________________________________________________________________________________________________________________________

Features of RCM03:

• Rockville RCM03 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount
• Aluminum high quality construction
• Polar Pattern: Internally Polarized Condenser Cardioid Design
• Large diaphragm for smooth, natural sound and low noise
• Power Requirements: 48V DC phantom power
• Uni-directional
• Sensitivity: -27dB±2dB(0dB=1V/Pa at1kHZ)
• Output impedance: 200Ω±30%(at 1kHz)
• Standard operating voltage: 3V
• Operating voltage range: 1.5V-10V
• Current consumption: less than 500uA
• Voltage deduction characteristic: within 3dB at 2V
• S/N ratio: More than 24dB
• Frequency Response: 30Hz - 20 KHz
• Fixed Crossover Filter cutoff frequency: 40Hz---16 KHz
• Load impedance: Greater or = to 1000 Ohms
• Equivalent Noise level: Less than 18dB A (IEC581-5)
• Max. Input SPL: 126dB(THD≤1.0% at 1kHZ)
• Electrical current: Greater than 4.8Ma
• Microphone body net weight:320 Grams (0.7 Pounds)
• Microphone Max.diameter 44mm (1.73” inches)
• Microphone Length 217mm (8.54” inches)
• Microphone material: steel grille + Alluminum (handheld part)
• PCB Layout: Surface mount