How to Use:
1. Using sandpaper or a file, abrade the area around the bruised hole with an appropriate sized surface, larger than the chosen film.
2. Apply glue to the cleaned area, apply it evenly and wait for about 3 minutes to allow it to dry fully.
3. Apply the film with the aluminium foil removed, taking care that the adhesive layer and the adhesive surface must be kept clean and not touched with dirt.
4. Flatten the film evenly with a roller to make it fit, and finally remove the protective film from the film.
Specification:
Item Type: Repair Patch Kit
Material: Plastic, Stainless Steel, Rubber
Package List:
2 x Tyre Pry Bar
16 x Tyre Patch
4 x Tyre Sharpening Pads
1 x Glue
2 x Rubber Band
1 x Storage Box