Feature

●??Package Content: This bicycle inner tube puncture patch kit includes 24pcs glueless patches(roound and rectangle), 4 pcs metal rasps, 12 pcs vulcanizing patches(3 sizes), 2 pcs metal tire level and they are stored in a convenient storage box for your convenience use and portability.
●??Pre-glue Patches: Self-adhesive patches total 24 pcs in 2 different styles, including rectangular and round, all are pre-glued for easy applications, they can stick on the tire tube easily without any glue, much easier and quicker to repair, and you can continue riding after sticking.
●??Vulcanizing Patches: This kit total has 18 pcs vulcanizing patches in 3 different sizes. When you want a more permanent fix, you can use them.
●??Metal Rasp: The metal rasp is effective for cleaning and polishing the area around the piercing so that the patch adheres firmly to the tube, you can use it to sand an area slightly larger than the patch you are going to use, then the patch will easier.
●??Repair Your Tire: This bicycle tire patches kit can be quickly pasted to the puncture part of the bike tire. For the self adhesive patches, you dont need any glue to stick. Its very convenient for you to repair the bicycle tire.

[Set 1]




[Set 2]





Description

bt201bt201

EDIONS Bike Inner Tube Patch Kits, Bicycle Tire Repair Kit with Glueless Self-Adhesive Patches, Vulcanizing Patches, Metal Rasp, Portable Storage Box for Bicycle, Motorcycle, Inflatable Rubber

Various Bike Patches

This bicycle tire repair kit Includes:

  • Round glueless patches -------12 PCS
  • Rectangle glueless patches ------- 12 PCS
  • Round vulcanizing patches ------- 8 PC
  • Rectangle(Large) vulcanizing patches ------- 4 PCS
  • Rectangle(Small) vulcanizing patches ------- 4 PCS

For the self adhesive patches, you dont need any glue to stick.

Steps for Usage

**Vulcanized Patch**

1. Remove the tire from the rim with the tire lever. Please exhaust the air in the tire in advance.

2. Inflate the tube and look for holes or listen for leaks. Put it under water to look for bubbles and mark puncture holes. Slightly scuff area to be patched with metal rasp and sandpaper to make it rough.(this is easy to remove the attached debris and allow the Rubber Cement to penetrate)

3. Then apply glue and wait a minute or so for it to dry completely.

4. Remove the foil backing from the vulcanized patch and attach the patch to the gluing area. In particular, apply pressure to the outer edge.

5. Make sure to inflate and test the tire pressure after 20 minutes of completely sticking.

**Glueless Patch**

1. Remove the tire from the rim with the tire lever. Please exhaust the air in the tire in advance.

2. Inflate the tube and look for holes or listen for leaks. Put it under water to look for bubbles and mark puncture holes. Slightly scuff area to be patched with metal rasp and sandpaper to make it rough.(this is easy to remove the attached debris and allow the Rubber Cement to penetrate)

3. Clean the polished part with some tools, ensuring the polished part has no dust, dirt and water.

4.Place the patch at the center of the hole and press it firmly from the center to the outside, ensuring the patch has no bubbles or wrinkles.

5.After a few minute, fill the bike tire with air.

Product information