Description of ASM4:

The Rockville ASM4 Active Studio Monitors were designed and engineered to be your go-to speakers for studio monitoring and entertainment. This is tuned to give a flat and balanced frequency response which also makes it the perfect computer speakers.

This speaker system provides full range monitoring accuracy with good bass down to 50Hz.

This speaker was DSP tuned by the Rockville development team. We compared it to the top studio monitors on the market and we made sure that we out-perform anything in our cost range.

The Neodymium silk dome tweeters give smooth highs while our efficient woofer and rear bass port provide clear mids and lows.

We added Bluetooth playback so you can use these for entertainment in addition to studio monitoring. We also added an optical input so you can connect these to your TV or other digital source. The left and right ¼" TS jacks will allow you to connect any pro audio source such as a mixer, interface, etc.

Features of ASM4:

• Rockville ASM4 4" 2-Way 200 Watt Active/Powered Pair of Studio Monitor Speakers with Bluetooth
• 200w Peak output / 50 Watts RMS
• 4" Woofer with efficient paper cone and rubber surround
• 1" Silk dome tweeter
• ½" MDF enclosure with rear firing port for enhanced low frequencies
• DSP tuned with a flat and balanced frequency response
• Built in Bluetooth playback with 35 foot range
• Optical input to connect to your TV or other digital source
• Left and Right ¼" TS input for any pro audio sources (mixer, interface, etc)
• RCA aux input
• 3.5MM aux input
• Bluetooth version 5.0
• Full Range Class D Amplifier Circuitry
• LED Power on Indicator
• Rotary Front Volume Control
• Curved Front Bezel Design Eliminates Standing Wave Distortion

Description of RVSM1:

These heavy-duty Near-Field monitor stands are designed with home and project recording studios in mind. The height is adjustable for listening while sitting or standing, and locks in place with a security pin. Three rubber pads on the bottom of the base keep this stand stable on any surface. The entire stand breaks down into four pieces for easy storage and travel.

Features of RVSM1:

• Studio Monitor Stands (Pair)
• Adjustable Height
• Steel Construction
• Nylon clutch for adjusting
• EVA Pad on top to eliminate unwanted vibrations
• Triple enforced steel base with ultimate sturdiness
• Black Color
• Weight capacity: 80 lbs.
• Adjustable height Range: 33-45 inches
• Base: 17.7 x 17.7 x 17.7 inches
• Top Plate: 9.05 x 9.45 inches
• Tube Diameter: 1.5 inch- 1.37 inch

Description of RRS190S:

The Rockville RRS190S is specially designed to increase monitoring accuracy. These are made to decrease unwanted vibrations and noises so that you are left with accurate sounds. No matter how good your monitors are, they can never sound the way they were meant to if they are carrying over vibrations and unwanted noises into your music. These are 7.5" by 9.5" and includes 2 pads which will accommodate (2) monitors.

Isolate your speakers!

Rockville isolation pads are designed to acoustically isolate your studio monitors. They were designed to work in studios and give studio quality sound; however some customers will also use them for high end home theater setups. Typically when speakers are placed on hard surfaces, they can vibrate. The vibrations cause the speakers sound to become inaccurate, unfocused and lose their "musical transparency." The Rockville Isolation Pad package includes a pair of high-density acoustic foam pads with multiple angle inserts that allow you to fine-tune your speakers positioning. Though conceived and designed for studio monitors/speakers you can decouple and isolate any sensitive studio device such as DVD players, turntables and laptops.

How to get maximum performance from your Monitors!

Rockville Studio Isolation Pads are the most cost-effective improvement you make to your sound system. Imagine the isolation pads as being your speaker systems "shock absorbers". Place the Rockville Isolation Pads under your monitors they will absorb vibrations and decouple your monitor to stop vibrations that would otherwise transfer into your studio environment. Isolation Pads will make a day and night difference in the sound quality of your studio. You spent good money on your studio monitors, now go the extra mile to make them sound their best.

Rockville Studio Isolation Pads Feature:

• Easiest and affordable way to improve your studio monitors sound
• Decouples your studio monitors from desktops and monitor stands for accurate reproduction
• Each package contains 2 Isolation Pads - enough for 2 studio monitors
• 2-part angled design provides you with a wide range of tilt options, including flat, +/-4 degrees, and +/-8 degrees
• Supports up to 100 lbs., so they can isolate a variety of studio gear
• Handsome charcoal gray color

Decouple your monitors for super-accurate sound

What Rockville Isolation Pads do is called "decoupling." When your monitors sit on your desk or floor, they transmit vibrations that cause the surface that theyre sitting on to vibrate at low bass frequencies. These bass vibrations dont get recorded in to your mix because they are not really in your mix. But when you play the mix in your studio the "coupled" vibrations, will be heard giving you false sound reproduction. But because these "coupled" vibrations are not being recorded when you play your mix outside of your studio, all those low bass frequencies will be gone. By "decoupling: your monitors, you eliminate these false low frequency vibrations, helping you to create accurate mixes that will sound great on any playback system.

Perfectly position your monitors

Rockville Isolation Pads allow you to position your studio monitors at the exact angle you need. Each pad comes in two pieces, each with a 4 degree angle. That allows you to tilt your monitor at one of five different angles: flat, +/-4 degrees, or +/-8 degrees. This allows you to place your monitors flat on your desk top or angled down for proper positioning. The most affordable way to improve the sound of your studio monitors

Features:

• Rockville RRS190S: Monitor Isolation Pads
• 3 Angle High Density Foam, 7.5" x 9.5"
• High quality, High Density Foam
• Eliminates vibrations and unwanted noises in your studio
• Price is for (2) pads which accommodates (2) speakers

Description of RCM03:

The Rockville RCM03 condenser microphone performs better than famous branded microphones that cost over 150 dollars. This model is similar to our RCM01 however it is made of aluminum, and the frame is slightly larger. We also upgraded this model to a high end metal anti-wind cap! We highly recommend this design.

Multi-Purpose

Designed for crystal clear capturing of vocals, acoustic and amplified instruments, as well as room reverb. The frequency pick up pattern makes the RCM03 amazing in studio applications.

The aluminum construction makes the RCM03 tough enough for Live sound applications as well!

Multiple connection options!

This microphone can be used in multiple ways. You can connect this to the phantom power of your mixer or you can connect it directly to your computer sound card. We include both cables! We include a cable to connect it to your mixer as well as a cable to connect the mic to your computer!

Quality built inside and out!

The microphone is made of aluminum. It is very rugged and tough like you would expect from any Rockville product. This microphone has a large diaphragm which is what enables our mic to deliver a wider range of high and low frequencies than our competitors. Our frequency range is tested at 30HZ - 20KHZ! The mic sounds crystal clear sound with no distortion!

The PCB (circuit board) uses surface mounted components which is the same method the expensive brands use. We use only top components that under-go extreme testing by our own audio engineers.

Features of RCM03:

• Rockville RCM03 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount
• Aluminum high quality construction
• Polar Pattern: Internally Polarized Condenser Cardioid Design
• Large diaphragm for smooth, natural sound and low noise
• Power Requirements: 48V DC Phantom Power
• Uni-directional
• Sensitivity: -27dB±2dB(0dB=1V/Pa at1kHZ)
• Output impedance: 200O±30%(at 1kHz)
• Standard operating voltage: 3V
• Operating voltage range: 1.5V-10V, Current consumption: less than 500uA
• Voltage deduction characteristic: within 3dB at 2V
• S/N ratio: More than 24dB, Frequency Response: 30Hz - 20 KHz
• Fixed Crossover Filter cutoff frequency: 40Hz---16 KHz
• Load impedance: Greater or = to 1000 Ohms, Equivalent Noise level: Less than 18dB A (IEC581-5)
• Max. Input SPL: 126dB(THD=1.0% at 1kHZ), Electrical current: Greater than 4.8Ma

Description of PRO-M50:

Rockville brings you studio quality headphones and at an incredible cost with its new PRO-M50 headphones. These are professional grade headphones that are guaranteed to ourperform headphones that cost triple the cost! These feature ergonomically designed swiveling cups with interchangeable soft suede or leather finish cushions (included). The ear cups seal tight for excellent sound isolation and minimal bleed. Inside these cups youll find 40mm Neodymium drivers delivering accurate audio with an extended frequency range for clear and rich bass, and a full frequency range of mids and highs. These are closed back style headphones specifically designed for studio monitoring. These play back the sound with a flat frequency curve so you can hear your music exactly how it was recorded. With the PRO-M50 you can expect to hear every detail of every song with extreme accuracy. These headphones cover full frequency ranges; even extending a bit past the frequencies that the human ear can hear.

The headband is made of soft leather, offering ultimate comfort even after extended wear. The beautifully designed stainless steel headband frame and arms are strong and durable. A detachable 51" coiled 100% Oxygen Free Copper cable with a gold plated 3.5mm plug is included along with a gold plated ¼" adapter to ensure the best possible signal. A hard leather case is included to store and protect your new investment when you are on the go.

Amazing sound quality will make these your go-to headphones whether in the studio or out and about!

Features of PRO-M50:

• Rockville PRO-M50 Studio Headphones w/ Detachable Coil Cable, Case+Extra Ear Pad
• Professional High-Definition Studio Headphones
• 40mm Neodymium drivers
• Ergonomically designed swivel ear cups
• Supreme sound isolation
• Accurate sound reproduction
• Minimal bleed
• Sturdy and durable steel headband and arms
• Soft leather headband cover
• Interchangeable leather and soft suede ear cups covers included
• Detachable 51" coil cable made of 100% Oxygen Free Copper (158" fully extended)
• Gold plated 3.5mm connector
• Gold plated ¼" adapter
• Hard leather carrying case
• Stainless steel headband frame and moving arms are durable and long-lasting