Feature

●BIENKA
●【High Pressure】 The built in dual paddle board pump possess of two stage: the maximum speed of the first stage can come up to 350 L/min and the maximum speed in the second stage is 70L/MIN. The inflation pressure value can be preset. The safety intelligent pressure system will automatically stop the inflation when the pressure attains the preset pressure value.
●【20PSI Electric Air Pump】 Programmed intelligent digital controller for dual stage inflation and LCD display. Use the digital display to set your desired pressure and monitor the pressure in real time. Pressure setting increments 0.5 PSI and support up to 20PSI. The SUP Pump supported working range 0.5 - 20 PSI, accurateness 0.01 PSI.
●【Wide Application】 12V SUP air pump, connect to the cars 12V DC plug. equipped with 5 different nozzles, suitable for most water inflatable products on the market. electric inflatable air pump can inflate inflatable stand-up paddle board, yoga ball, inflatable boats, kayaks, inflatable bed, pool float, inflatable sofa, inflatable tent, etc.
●【Premium Quality】 Major parts made of marine grade engineered ABS and Nylon material for durability. Built-in sand filter for air intake & pump cooling system. Super light weight 4Lbs and small size with easy carry handle. Durable quality and eco-friendly material offer a promising summer journey.


Description

BIENKA
Specifications:
Model: HT-782
Pump Support Rate: 0.5-20 PSI
Digital Sensor Accuracy: 0.01 PSI
Controller Method: Pre-programmed digital controller board
Max Pumping Speed: 350L/min at 1st Stage, 70L/min at 2nd stage
Pump Stage 1: Sealed and quiet turbo fan for high volume inflation
Pump Stage 2: Engineered cylinder type compressor for high pressure
Dual Inflators Switch Point: 0.65 PSI
O Ring Thickness: 0.3mm / 0.5mm / 0.6mm
Sand Filter: Dual filters for air intake and pump cooling
Pump Working Voltage: 11-14V DC
Max Energy Consumption: 10A, 110W
DC Power Cord Length: 9ft
Air Hose: 4ft Length & with HR Valve Adaptors
Weight Approx 1933g
Package List:
1 x Pump
1 x Tube
5 x Nozzles
1 x Manual
Note:
The valve connector with hose is suitable for inflatable boats and SUP equipped with for HR , for Bravo, for Naru or similar air valves. This kind of air valve has a rotating pin or pressing pin in the middle to control the opening and closing position of the valve. Three silicon O-rings can be selected to maintain the best air tightness of the connection.
When the air valve interface is in use, the air leakage does not match, you can replace the spare white rubber ring