[Wooden]
[Blue]
[Black]
[Orange]
Be able to imitate movements of humans arm and hand, the robotic arm can be programmed to grab and move objects or use tools automatically.
|
|
|
---|---|---|
Learning Mode:Write the code to control the robotic arm to perform the specific motions. Press the pointed key in the computer, then the robotic arm kit can execute your commands, and make corresponding action. |
Drawing Board Mode:You can draw the line on fan-shaped board in computer, then the robot arm can draw the same shape on the paper. |
Memory Mode:Press the red button shortly to let the control board record this step, record the rest steps in this way, when all the steps done, press the red button for awhile (3s), it will repeat the redorded steps. |
|
|
|
|
---|---|---|---|
Oled ScreenThe oled screen can indicate the current states and remaining steps, which can help you know the processing well. |
5 AxisGripper opens to 3.66 inches and 90 degrees, radial wrist motion of 180 Degree, an extensive elbow range of motion of 180 Degree, base rotation of 180 Degree. 4 Axis design makes the robotic arm move flexibly that can grab objects in any direction. |
BaseWith the round base design, the arm can ronate without any sway. Built in the stainless steel bead, which makes the arm ronate smoothly. |
Suction Cup DesignUsing the vacuum cup, the robot arm can be stably fixed on the table to prevent the robot arm from slipping due to movement. |
1 Set Acrylic Plates; 1x Bearing;
1x Adeept Robotic Arm Driver Board;
1x 0.96 OLED Display; 4x Suction Cup;
6x Servo(MG90S); 1x Battery Holder;
1x Cross Socket Wrench;
1x Cross Screwdriver;
1x Winding Pipe; 1x Micro USB Cable;
Other Necessary Accessories(Wires, Nuts, Screws, Copper Standoffs, etc.)