Before installation, please open the electromagnetic over of the sensor/ computer and take off the battery protective film.
Multiple functions
Memory function(all the data won’t be lost even you change a new battery)
Speed tendency
Current speed
Odo odometer
DST distance
MXS Max speed
TM Riding time
CLOCK
Backlight(press both button to keep the light on)
Calories level(CAL)
Temperature
Low power indicator(Remind when the battery is low)
Auto free assembly
Miles Setting(KM/hr,M/hr Setting)
Scan
Fast scan
Setting ODO
Speed comperator
Auto start/stop
Wheel circumstance Setting(0-9999mm)
SIMPLE STEPS SETUP:
Install Batteries(Please remove the battery conver before installation.Positive pole( ) should be set upwards)
Reset and Pair the computer prior to first use in order to achieve the most accurate results
Install the Bracket
Mount the Sensor
Mount the magnets
Set the computer into the Bracket
Note: Pay attention to the distance among the speed
magnet,cadence,magnet,and sensor(<3mm)^_^
HOW TO INSTALL SENSOR AND MAGNET:
1. Make the sensor and magnet in the lower position ( in front wheel)
2. Make the side of the sensor face to the magnet ( not the side with the battery cover)
3. Aligh the center of the sensor with the center of the magnet. Keep the distance of the sensor and magnet less than or equal to 3mm
HOW TO INSTALL THE COMPUTER, SENSOR & MAGNET
1.Install the bracket on the handlebar
2.Fix the bicycle computer on the bracket
3.Mounting the magnet( fixed in the spokes)
4.Install the sensor( fixed on the front fork)
5.Aligh the center of the sensor with the center of the magnet. Rotate the sensor to adjust the distance between the sensor and the magnet so that the distance can equal to or less than 3mm
NOTE: MORE MORE DETAILS PLEASE READ THE MANUAL