[1.5M]

1-3KG Spring Balancer Self-locking Tower-Type Lifting Hook Spring Holder Balancer Steel Wire Rope Balancing Lifting Jack 1.5M

How to use the spring balancer:
1. Rotate the balancer of the appropriate size according to the weight of the suspended object
2. Hang the lifting ring of the balancer on a solid beam or node above the station,
And note: the user must put the safety hole on the beam or the node to ensure absolute safety in use. 3. Lift the operating tool to a position slightly higher than the height of the hook under the balancer and then hook it.
4. Adjust the balance weight of the balancer to be consistent with the weight of the tool used or slightly larger, so that the tool can be balanced at any position up and down, that is, the tool is in a weightless state
5. When the balancer is removed from the tool, it must be carried out after the steel ropes of the balancer are all involved in the tower wheel, in case the lower hook of the balancer cannot be pulled, causing a sudden unloading, and the hook is quickly retracted, causing injury or steel. Rope misalignment damages the balancer
6. Do not pull or release the balancer without any reason when the balancer is not attached to the tool, so as not to cause the wire rope to be stuck in the wrong slot. 7. The operating tool moves laterally, and the angle does not exceed 45°. The wire rope needs to be moved to the nearly vertical ground. retract.
Precautions:
. When disassembling the tower spring balancer, it is necessary to turn the adjusting worm anticlockwise first, so that the coil spring is completely in a relaxed state before other work can be performed.