Feature

●【Applications】: Ideal for cleaning boats, fish boxes, anchor wells, dinghies and caravans Multi-step corrosion protection and seamless motor body for enhanced protection;
●【Features】: 5 independent chambers. Run dry capability. Self-Primming up to 1.83m / 6 feet. Continuous duty. Spray gun range 10m / 32.81 feet;
●【Advantages】: This pump boasts a huge capacity and has an on-demand switch, so the pump automatically turns on when you squeeze the spray gun handle. With 70 PSI cutoff, this has the presssure to get rid of stubborn debris. Anticorrosive stoving varnish coated motor;
●【Specifications】: Open Flow 18.9LPM/5.0GPM, Volts 12V, Amps 8.0A, MAX.AMPS 18.0A, Press Setting 70PSI/4.8Bar, Control Type Switch;
●【Note】: You can get the most friendly customer service, please feel free to contact us if you encounter any problems during use, 90 days free return or refund.


Description

Features
? 5 independent chambers
? Run dry capability
? Self-Primming up to 1.83m / 6 feet
? Continuous duty
? Spray gun range 10m / 32.81 feet
? Anticorrosive stoving varnish coated motor
? This pump boasts a huge capacity and has an on-demand switch, so the pump automatically turns on when you squeeze the spray gun handle.
? With 70PSI cutoff, this has the presssure to get rid of stubborn debris

Specification
? Open Flow : 18.9LPM/5.0GPM
? Volts : 12V
? Amps : 8A
? MAX.AMPS : 18A
? Press Setting : 70PSI/4.8Bar
? Control Type : Switch
? Valves : EPDM
? Port : 3/4 Quick Attach
? Wire Connection : 2-pin/Leads

Applications
? Ideal for cleaning boats, fish boxes, anchor wells, dinghies and caravans;
? For marine, RV, and recreational deck wash applications;
? Suitable use with for fresh water or saltwater

Installation Manual Setup
? Do not apply inlet pressure in excess of 30 psi. In general, try to avoid any inlet pressure completely;
? Strainer should be attached to the inlet side;
? The fittings must be secured to avoid leakage;
? Connect the positive lead(red )to the positive terminal of your battery and the negative wire(black)to the negative terminal of your battery;
? As the water supply pump is non-essential, reference the wire chart under the electrical information. Be sure to have the correct wire sizing for the length of wire you are using;
? After installation, check the voltage at the pump motor. Voltage should be checked when pump isoperating. Full voltage must be available at the pump motor at all times.

Note
? Manual measurement, error 1-3cm, depending on the actual situation, please understand;
? Please feel free to contact us if you meet any problems during use, 90 days free return or refund.