Feature

●Wide Application: Widely used in garden machinery such as hand push lawn mowers, riding lawn mowers, chain saws, etc.; agricultural machinery such as branch chippers, weeders, seeders, etc.
●Application: Widely used in hand push lawn mowers, riding lawn mowers, chain saws and other garden machinery; rammers and other road machinery; water motorcycles, outboard motors and other marine industries; vehicle industries such as motorcycles, ATVs, and snowmobiles; portable generators, RV generators and other generator industries; powered paragliders and other sports equipment; branch chippers, weeders, seeders and other agricultural machinery; etc.
●IP68 protection------The digital display tachometer is sealed with epoxy resin, and the waterproof level reaches IP68. It can be used normally in harsh environments such as heavy rain and has high reliability.
●【Low power consumption, long life side】The kit contains: 1 x Digital Tachometer; 2 x Cable Ties; 2 Screws; 1 x Manual; 1 x Wiring. Complete package, our tachometer has built-in 1PC button battery CR2450 3V 540mah, low power consumption design. Built-in chip automatically stores data, will not be lost for more than 20 years, not easy to damage, ideal for you to replace the old or damaged
●【Characteristic】Indicates operation in RPMs and Hours. Resettable for current JOB time; Total time not resettable. 9 programmable firing patterns. Record maximum RPM of engine. Programmable maintenance interval timer(SVC). Programmable CLEAN AIR FILTER timer Programmable CHG OlL timer


Description

How to Use:
Surface mount, screw or double sided tape (not included).

Specification:
Item Type: Digital Tach Hour Meter
Material: ABS
Power Supply Voltage: 3V
Timing Range: 0-999999H
Timing Accuracy: 1min/0.1H/1H
Maintenance Range: 0-1000H
Speed Range: 0-30000RPM
Speed Accuracy: 10RPM
Display Mode: LCD
Waterproof Rate: IP68
Battery: Built in 1PC button cell battery CR2450 3V 540mah
Function:
1. Dual interface display of timing speed.
A. The factory default timing interface, switch the interface by long pressing the button.
2. Timing function
A. Record the total working time of the vehicle
B. The timing range is: 0-999999H, which cannot be cleared when totaling.
C. Two sets of single timing can record the time of a certain running of the vehicle. The single timing range is 0-999999H, and the single timing can be reset by pressing the button.
D. Timing method: gasoline induction timing.
3. Maintenance reminder
A. According to the maintenance requirements of the engine, set the replacement oil filter, air filter time, and engine maintenance time
B. The maintenance time setting range is 0-1000H, which can be set or closed.
C. Reminder method for replacing oil filter: when the countdown is 0, CHG OIL flashes to remind, long press to reset
D. Change the air filter reminder mode: when the countdown is 0, the CLEAN AIRFILTER flashes to remind, long press to clear
E. Maintenance timing reminder mode: when the countdown is 0, SVC flashes to remind, long press to clear

Package List:
1 x Digital Tach Hour Meter
2 x Cable Ties
2 x Screw
1 x Manual
1 x Wiring