Feature

●? Built in Battery and LCD Display: RPM meter has built in CR2050 battery, LCD digital display, allowing you to read the data easily.
●? RPM Test: When the tachometer continuously detects the 1s signal, it will display the current RPM. The test range is 0 to 25000RPM.
●? Timing System: Tach hour meter will record the total working time of the engine, the initial timing value is 0, and the maximum timing value is 99999 hours.
●? IP68 Waterproof: The waterproof grade of the digital tach hour meter is IP68, weatherproof and dustproof, can be used in various enviroment.
●? RPM Test: When the tachometer continuously detects the 1s signal, it will display the current RPM. The test range is 0 to 25000RPM.


Description

Specification:
Item Type: Tach Hour Meter
Material: ABS
Display Mode: LCD
Speed Range: 0-25000RPM
Timing Range: 0-99999H
Maximum Speed: 10RPM
Timing Accuracy: 0.1H/1H
Battery: One CR2050 410mAh (built in)
Waterproof Grade: IP68
Scope of Application: Motorcycles, ATVs, outboard motors, generators, lawn mowers, chainsaws, air compressor, road machinery and equipment.
Timing system
1. Record the total working time of the engine
When the product detects a signal continuously for 1 second, start to count, and the hourglass flashes
2. When the product continues to work for 6 minutes, the display data is 0.1 hour
3. The timing mode is positive timing, the initial timing value is 0, and the maximum timing value is 99999 hours.
4. When the total operating hour is in the range of 0-9999.9H, the resolution hour is 0.1H
Speed system
1. RPM test: When the product continuously detects the 1s signal, it will display the current RPM. The test range is 0-25000RPM.
2. Maximum speed view: When the engine stops working, the speed timer LCD flashes for 5 seconds, and the maximum speed is displayed at this time.
Connect the signal wire, connect the spring end of the signal wire to the signal end of the instrument, wrap the other end of the signal wire around the spark plug wire more than 5 times, and fasten the end of the signal wire with a cable. Start the engine and the hourglass will flash, which means the connection is correct.
To fix the product, put the product into the installation hole, and fix the product with the snap joint.

Package List:
1 x Tach Hour Meter
1 x Manual
1 x Wire
3 x Accessories