Feature

●Wide Application: Widely used in garden machinery such as lawn mowers, chainsaws, etc.; road machinery such as tampers; marine industry such as jet skis, outboard motors, etc.; off road vehicles, snowmobiles, etc.; portable generators and other equipment with rotating shafts.
●Timing Function: When the sensor probe detects the rotation signal of the rotating shaft for 1S continuously, the meter displays the speed and starts timing, timing accuracy: 0.0?9999H59Min, 1M; 10000?999999H, 1H. Built to meet original standard specification, strictly follows the factory quality control.
●Maintenance Function: The setting range is 0?1000H, the default value is 0, which means that the maintenance timing function is turned off. When the countdown reaches 0, the main interface SVC and NOM flash alternately to remind. With high reliability, the Motorcycle Tachometer is not easy to be damaged and can function well for you.
●Speed Function: Speed range 0?30000RPM, maximum speed function, the current measured value of the speed value exceeds the historical record, the historical record value will be updated. Practical and convenient in use. Such a practical tool you will need it.
●Sleep Function: press the button on the main interface for 2S, after 1S, OFF will be displayed, and the product will be turned off; after that, it can be woken up by short pressing the button or continuously detecting the rotating shaft signal.


Description

Specification:
Item Type: Tach Hour Meter
Material: ABS
Induction Wire Specification: UL2464-26AWG/3C
Black Wire Length: Approx. 1.2m/47.24in
Timing Range: 0-999999H
Maintenance Range: 0-1000H
Rotational Speed Range: 0-30000RPM
Battery: 1 x button cell CR2450 3V 540mah (included)

Function Introduction:
1. Timing function: When the sensor probe detects the rotation signal of the rotating shaft for 1S continuously, the meter displays the speed and starts timing, timing accuracy: 0.0-9999H59Min, 1M; 10000-999999H, 1H
When the timer exceeds 999999H, the timer will restart from 0.0
¡e¨´Record the total working time (range 0-999999H), the timing cannot be reset
¡e¨²Record the single timing of two groups of JOB1/JOB2 (range 0-999999H), the timing can be reset to zero
2. Speed function
¡e¨´After the sensor probe detects the rotation signal of the rotating shaft for 1S continuously, the meter displays the speed and starts timing
¡e¨²Rotation speed range: 0-30000RPM
¡e?Maximum rotation speed function: When the rotation speed value of the current measured value exceeds the historical record, the historical record value will be updated
3. Maintenance function
The setting range is 0-1000H, the default value is 0, which means that the maintenance timing function is turned off
When the countdown reaches 0, the main interface SVC and NOM flash alternately to remind

How to Use:
Fastenthesensorwithascrew,andfixthemagnetontheshaft.

Package List:
1 x Tach Hour Meter
1 x Manual
2 x Screw
1 x Button Battery
2 x Tie