[SM Connector]

[Waterproof Connector]

Important:
Please notice that our this PAS sensor is KT brand,only for KT controller.
If use with other controllers,maybe cant work.

Pedal Assist Sensor Feture:
Type : Dual Hall PAS Sensor for KT Controller
Notice:KT display setting C1=7
Installation : Left side
Voltage : Use with 36V,48V KT contoller
Magnet : 12 Magnets
Cable Length : 90cm not include the sensor and connector
Connector : 3Pin SM Connector,not waterproof
Corresponding time when brake:20M times

This Pedal Assist Sensor Feature:
1.Output 12 signals with fast power-assist response speed, and it can automatically identify the positive rotation and the reverse rotation of the pedal;
2.When coupled with a two part magnet disc it dose not require the crank assemble to be disassembled to install.

How to install:
1.Pedal assist sensor uses the left installation mode, during the installation,
2.Its simple,dose not require the crank assemble to be disassembled to install.
3.Magnet plate assembly should plug the two pieces of magnetic steel plate, which is then fixed by using a circlip.
4.The assembled magnetic steel plate is as shown below.
Each cable is labeled with color for different uses.