Feature

●Specifications: PU composition Pressure sensitive backing Matte finish 757 Microns / 29.5 Mils 45°/60° blade Can be layered
●Applies to: 100% cotton 100% polyester Poly/cotton blends Leather
●Heat Application: Time: 10-15 Seconds Temperature: 305° F / 150° C Pressure:Medium Peel: HOT or COLD
●Care Instructions: Machine wash WARM or COLD / mild detergent Dry at normal setting No chlorine bleach Wait 24 hours before first wash


Description

Material Specification:

• PU Composition
• Thickness:757 Microns / 29.5 Mils (Please make sure plotter is capable of cutting such thickness)
• Heat pressure sensitive backing
• Flock Finish

Application Instruction (Home Iron)

• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds
• let it cool for about 30-45 seconds and then gently peel back the clear plastic until it is completely removed.

Application Instructions (Heat Press)

• Cut in reverse
• Weed excess material
• Preheat all fabric prior to pressing for best results
• Apply design at 305F/150C-160°C for 12-15 seconds
• let it cool for about 30-45 seconds and then gently peel back the clear plastic until it is completely removed.

Applies to:

• 100% Cotton
• Poly / Cotton Blends
• 100% Polyester
• Leather

Laundering:

• Wait 24 hours before 1st wash
• Machine wash warm or cold / mild detergent (Max 60°C)
• Dry on normal dryer setting
• Do not bleach or dry clean