[Olny Controller]

[Controller and LCD3]

[Controller and LCD5]

Notice:
1.This Controller work with sensored Brushless DC motor and Kunteng LCD only.
This controller is not suitable for scooters.
2.Work voltage:36V or 48V Universal (support both voltage)
3.Suitable for Brushless Non-gear Hub Motor 500W/350W
4.This one is Square Wave Controller.
Specifications:
1.Mosfet:9 mosfet
2.Work voltage:DC 36V or 48V
3.Rated current:12A
4.Low voltage proection:DC30/40±0.5V
5.Max current:25±1A
6.Speed set: 1-4.2V
7.Size:127*67*40mm

Details:
-Phase cable(3pcs) connect with motor
-Hall sensor wire
-Battery cable(XT60)
-Throttle
-PAS Sensor
-Speed sensor
-Brake connector (2pcs)
-Light connecotr 1(Output power only 3W)
-Light connector 2(Output big,connect battery directly)
-Electric lock
-Display
-Back up
-Cruise
25A controller with one KT LCD 4 display
1. Dimension: 10x19x54mm.
Note: How to determine the value of the parameter P5 ? The formula is LVC+P5/3.77.
For 24V battery, LVC=20V, P5/3.77=1.
For 36V battery, LVC=30V, P5/3.77=1.5.
For 48V battery, LVC=40V, P5/3.77=2.
You can adjust P5 parameter by your own battery discharge curve.

25A controller with one KT LCD 5 display
1. Dimension: 16.5x51x77mm.
Note: How to determine the value of the parameter P5 ? The formula is LVC+P5/3.77.
For 24V battery, LVC=20V, P5/3.77=1.
For 36V battery, LVC=30V, P5/3.77=1.5.
For 48V battery, LVC=40V, P5/3.77=2.
You can adjust P5 parameter by your own battery discharge curve.

25A controller with one KT LCD 3 display
1. Dimension: 20x65x96mm.
Note: How to determine the value of the parameter P5 ? The formula is LVC+P5/3.77.
For 24V battery, LVC=20V, P5/3.77=1.
For 36V battery, LVC=30V, P5/3.77=1.5.
For 48V battery, LVC=40V, P5/3.77=2.
You can adjust P5 parameter by your own battery discharge curve.
FAQ:
1.Q:Tell me what is the difference between