[24V whole set]

[36V LCD display]

[36V controller]

[Thumb brake]

Mini Round Electric Bike Scooter Controller Brake LCD Unit Carbon Fiber Scooter Motor Controller 24v 36v 48V 250w 350w
Important Note of single controller and single LCD display choice.
A. Lcd display looks same in appearance with 3 key,while there is 2  connetors , 5+1 pin , 4+3pin.
The one we have is 1 connector with 6pin.
It will not work if you choose single lcd display or singel controller.
B. LCD display is totally same in appearance and with 6 pin connector.
Inside protocol is different from different suppliers.Single LCD display or controller will not work  if the protoicol is not match!!!
Application, 
Folding scooter controller replacement, Wheel 4" 5" 5.5" 6.5" 8" 8.5", power 350w and below
Carbon fiber scooter controller kit,
Controller
Controller installation size
86*46*38mm

Technical data
5. Settings
1) When P1 is displayed, the kilometer/mile
unit conversion setting, short press
the up key or short press
the down key to adjust the setting.
When it is set to 0, it selects kilometers, and when it is set to 1, it selects
miles.
2) When P2 is displayed, there are cruise
and no cruise selection settings. When it is set to 0, there is no cruise, and
when it is set to 1, there is cruise (some cars do not).
3) When the display P3 is the zero start
and non-zero start selection setting, when it is set to 0, it selects zero
start, and when it is set to 1, it selects non-zero start (some cars do not).
4) When P4 is displayed, it is the wheel
diameter selection setting: unit, inch; precision: 0.1; (viewable, not
adjustable)
5) When P5 ODO reset setting is displayed,
press and hold the key for 5 seconds to reset ODO
6) Long press + again to exit the setting
state and save the set parameters.
6. Fault display
When the electric scooter fails, the meter
will display the faulty components, inc