[48V Set]

36V/48V 500W 25A BLDC motor controller E-bike brushless speed driver and GT-100 LCD Display one set
Rated Voltage: 36V/48V/52V/60V
Low Voltage Cutoff: 30/40V/42V/50V+-0.5V
Rated Power: 450/500W
Limit Current: 25A+-1A
1)Super low noise when start up
2)Under-voltage protection
3)Over-current protection
4)E-ABS, low level brake
5)With PAS connector ( only 5 or 6 magnet pas works good)
6)With self learn wires(Self learn function only can be used when the PAS set at 2 or more )
7) With GT-100 display connector
8)Throttle of the display and throttle of the controller cant work at the same time .
This controller and lcd display must connect the motor hall sensor and throttle! And the speed limit can works for pedal assist and throttle .
All of our standard LCD and controller sets 1-5 speed only for pedal assist and throttle , all the standard sets works like this. If you want the 1-5 speed change only for PAS, you should tell us before placing the order.
When you place order of controller only 48V, then we only can send controller no display, the default controller can work 36V 48V and 52V.
Each cable is labeled with color for different uses.