[Only controller]

[Controller LCD4]

Feature of KT Controller:
1. Use a sine wave control, the motor ripple is minimized to achieve no noise, no vibration, smooth and comfortable of driving vehicle
2. Increase the low speed district of motor to meet the high requirements of the vehicle during its start-up and climbing, improving climbing performance, zero start-up is available
3. Improve the operating efficiency of the motor; reduce the controller temperature-rise, increasing the vehicle continuous mileage
4. With a multi-protection functions such as the stall, over-current, over-temperature, under-voltage, speed driving, phase shortage, output short circuit etc., so as to protect the vehicle electronic control systems and traffic safety

Notice:
1.This Controller only work with sensored motor and Kunteng LCD only.
2.This controller is not suitable for scooters.
3.Work voltage:36V or 48V Universal (support both voltage)
4.Suitable for Brushless Non-gear Hub Motor 1000/1500/2000W

Controller Specifications:
1.Type:KT 45A controller
2.Voltage:DC 36V 48V
3.Rated current:22A
4.Max current:45A
5.Low voltage protection:DC30V/40V
6.Mosfet:18 mosfet DC sine wave controller
7.Size:235*80*40mm
8.Compaitble Motor:1000W 1500W 2000W

All Connectors:
-Phase cable(3pcs) connect with motor
-Hall sensor wire
-Battery cable(XT60)
-Throttle
-PAS Sensor
-Speed sensor
-Brake connector (2pcs)
-Light connecotr 1(Output power only 3W)
-Light connector 2(Output big,connect battery directly)
-Electric lock
-Display
-Back up
-Cruise
Each cable is labeled with color for different uses.