[48V-84V 3000W]

48V-84V 3000W 80A brushless controller work with hall sensor/not have hall sensor
Name: Intelligent dual-mode brushless controller
Power: 3000W
Voltage: 48V-84V
Current limit: 80A
Undervoltage: automatic identification
MOS tube: 24mos
Phase: automatic identification (60 ° / 120 ° all can fit)
Brakes: low brake / high brake
Size: 225 * 118 * 68 mm
Function introduction (from the right to the left of the picture)
.motor
.battery
.electric lock
.hall
.display
.throttle
.throttle 3-speed (low/medium/high)
.high brake
.reverse
.alarm signal
.alarm power
.low brake
.self-learning
.connect the motor line (color to color)
. connect the battery line(red:+ , black:-)
. connect the controller throttle line, electric lock(if throttle not have
electric lock, connect controller electric lock to battery+ )
. connect the hall line(if motor without hall line, dont need connect)

.docking the two self-learning lines, the wheel will forward or reverse.
(1.if wheel forward ,Separate the self-learning line.
2.if wheel reverse, Separate the self-learning line. Docking the self-learning line again
if wheel forward ,Separate the self-learning line.)
.other functions can be connected as needed.
Each cable is labeled with color for different uses.