Feature
●Steel Degree Shims designed to correct pinion angle or caster, and are zinc plated to help fight off corrosion
●Designed to bolt into your leaf spring pack
●Center Pin Hole is milled and drilled to 3/8”, and can easily be drilled out to a larger size
●Sold as a pair
●Made in the USA!
[2° Degree]
[8° Degree]
[4° Degree]
[6° Degree]
Description
WFO Concepts Steel Degree Shims are designed to correct pinion or caster angles. They are machined from mild steel then zinc plated to help fight off corrosion. These shims are designed to bolt into your leaf spring pack. Hole is drilled and countersunk to fit a 3/8 center pin but can easily be drilled larger if needed. Sold as a pair. Made in the USA! Shim Dimensions: 2 degree shim: length = 5", height (thick end) = 0.238", height (thin end) = 0.075" 4 degree shim: length = 5", height (thick end) = 0.485", height (thin end) = 0.135" 6 degree shim: length = 5", height (thick end) = 0.625", height (thin end) = 0.100" 8 degree shim: length = 5", height (thick end) = 0.750", height (thin end) = 0.050"