Feature
●Perfect Repair: Paistely metal glue is a high strength epoxy adhesive used as an alternative to torch welding, providing strong and durable repairs to metal and several other surfaces, forming a strong and stable permanent bond. This product can be cured at room temperature, easy to use, high strength, good wear resistance, heat resistance, corrosion resistance and impact resistance.
●Wide Range of Applications: Paistely metal repair glue is widely used to fill casting defects such as trachoma cracks in iron and copper castings, and can also be used as general structural glue for bonding. It adheres to virtually any dry surface free of dirt and oil, and can be shaped, filed, sanded, drilled, etc., depending on its application.
●Easy to Use: Paistely glue for metal adopts a push rod design, which can ensure that the paste in the A and B tubes is extruded at the same time in a ratio of 1:1. There is no need to control the glue ratio by yourself, to prevent the situation that the metal epoxy does not dry or the adhesion is reduced due to improper ratio.
●Cost-effective Kit: Paistely metal glue has a complete set of accessories, including A and B metal adhesive (40g*2), disposable gloves*1, wooden stirring rod*2, stirring plate*1. Quickly repair damaged areas, the complete kit is more convenient to use and less likely to get dirty hands or other parts of the home.
●Thoughtful After-sales Service: If you are not satisfied with the Paistely metal glue you received, or the glue overflows due to the shipping process, please feel free to contact us and we will be happy to provide you with a replacement or refund.
[1 pack]
[2 pack]
Description
COMPLETE KIT
A and B metal adhesive (40g*2): need to be mixed in a ratio of 1:1
Stick*2: Mix A and B metal to metal adhesive
Disposable gloves*1: Prevent your hands from getting dirty
Stirring board*1: Put metal glue A and B on it to stir, which is more convenient
NOTICE
Optimum operating temperature for metal glue: 68°F - 86°F
Maximum temperature for metal glue: 266°F
Metal glue curing time: 10-30 minutes
- Alternative to torch welding
- High and low temperature resistance
- Steel hardness
- Fast curing
- Multipurpose
- Easy to use
Instructions
|
|
|
|
|
|---|---|---|---|
|
1. Ensure that the surface of the adherend is dry and free of oil stains, and the surface can be lightly polished with a file and sandpaper; |
2. Install the push rod, and push out the same amount of metal repair gel A and B from the two pipes to the stirring plate; |
3. Mix the metal glue evenly with a wooden stick (the mixed glue should be used up within 20 minutes); |
4. Smear the mixed glue evenly on the surface to be bonded, and fix it, and wait for more than 24 hours. |
MATTERS NEEDING ATTENTION
Keep away from children, use in a ventilated environment, it is recommended to wear protective gloves;
If the metal epoxy comes into contact with the skin, please wash it off with soap;
In case of accidental contact with eyes, please rinse with plenty of water and seek medical attention as soon as possible;
Metal to metal glue is not necessarily suitable for all materials, please conduct a small-scale test before mass use.