Feature

●【Service Media/Material】 Air, Gas, Liquid, Water./ Anodized Aluminum
●【Port Coil Voltage】 24V Port size: 1/8" Female inlet/outlet port.
●【Temperature/ Pressure Range】 23-176°F, Pressure Range:115 PSI.
●【Selenoid Valve Type】 2 Way Normally Closed (Valve opens with energized). Normally closed type with long life span and excellent sealing.
●【Feature】This solenoid water valve is a Zero differential solenoid valve which can be operated at 0 PSI (Vacuum). Comes with a ED 100% encapsulated coil which suitable to operate in continuous service and constant energized.

[1  & 4  NPT 110V]




[1  & 8  NPT 24V]




[1  & 4  NPT 12V]





Description

solenoid valvesolenoid valve

solenoid valve 12vsolenoid valve 12v
Beduan, manufacturer & distributor of top pneumatic supplies Our production line includes:

  • Compressor Filter and Regulator
  • Push to Connect Fittings
  • Solenoid Valve
  • Compressed Ferrule Fitting
  • Marginal product
  • Search Beduan and choose what you want

Beduan 2 Way Electric Solenoid Air Valve

Normally Closed Electric Solenoid

Body Material : Anodized Aluminum

Pressure Range: 115 PSI.

Size：1/4” | 1/8“

Position & Way Number : Two-position,Two-way.

2-way normally closed solenoid valve is to control On/Off of air and inert gas. This solenoid valve has one 1/4" inch NPT inlet and one 1/4" inch NPT outlet port. Valve stays close when the coil is de-energized- and it opens when energized. Has two holes in the bottom and can be mounted in any position.

Service Media : Air- Gas- Liquid- Water
Operation Model : Direct Acting
Flow Model : Uni-Directional
Flow Rate : 0.23Cv (Fluid Flow)- 22 SCFM at 100 PSI (Air Flow)
Response Time : Less than 20 ms
Seal Material : NBR (Buna N) Armature
Plunger & Spring Material : Stainless Steel
Coil Power : 6.5W
Coil Class : F Class IP 65 (CE)
Coil Duty : 100% ED (Continuous Duty)
Operating Pressure : Vacuum to 115 PSI
Operating Temperature : -5 to 80 °C
Voltage Tolerances : DC : +10% ?5% , AC : +10% -15%
Electrical Connection : Grommet Coil with 12" Lead Wire 2ACK Series Electric Solenoid Valve

air solenoidair solenoid

12v air valve12v air valve

co2 solenoid valveco2 solenoid valve

1/2 air solenoid 12v1/2 air solenoid 12v

Solenoid Valve Installation Instructions

  1. Clean and rinse the impurities in the pipeline before installation;The thread should be wound with Teflon Tape. Be careful not to drop the debris into the pipeline to prevent blocking the solenoid valve.
  2. When installing, keep the arrow direction on the valve body consistent with the flow direction of the medium;If there is reverse pressure, a check valve shall be installed.
  3. In order to ensure and extend the service life of the solenoid valve, the installation should be horizontal, the coil is vertical up, not vertical or backward installation.
  4. After the solenoid valve coil outlet wire (connector) is connected, it should be confirmed that whether the contact of electrical components should be firmly connected should not shake, looseness will cause the solenoid valve not to work.
  5. Solenoid valves that are out of service for a long time should be cleaned of impurity condensation before use.
  6. Solenoid valves are not suitable for fluids under the following conditions: A.Changing into a liquid by heating and into a solid by cooling; B.Viscosity greater than CST50.

air solenoid valve water solenoid valve pneumatic solenoid valve electric solenoid air valve air solenoid valves
Brass Solenoid Valve Water Solenoid Valve solar solenoid valve Air Solenoid Valve Nylon Solenoid Valve
Port Size : 1/2" Inch NPT Female 1/4" Inch NPT Female 1/8" Inch NPT Female 1/4" Inch NPT Female 1/4" Inch NPT Female
Port Coil Voltage : 12V DC 12V DC 24V DC 12V DC 12V DC