Feature:
1. Stable Working: This pneumatic cylinder can work stably and efficiently under 0.15 to 1.0MPa without getting stuck.
2. Double Action: Double action type allows for loading on both directions, which ensures reliable working performance.
3. Secure Sealing: Sealing ring together with M30 cover thread enables firm and tight connection without leakage.
4. Good Material: Having been through plating process, the aluminium alloy with high strength is not easy to deform.
5. Easy to Install: Comes with small size and light weight, the installation can be easily completed in minutes.
Specification:
Item Type: Cylinder
Product Material: Aluminium Alloy
Product Model: MAL40-75
Action Form: Double Action Type
Working Medium: Air
Pressure Range: 0.15~1.0MPa
Operating Temperature: -5~70℃
End Cover Thread: M30
Air Inlet Thread: G1/4
Piston Rod Thread: M12
Package List:
1 x Cylinder
Note:
1. When the load changes during work, a cylinder with sufficient output power should be selected;
2. Under high temperature or corrosive conditions, corresponding high temperature or cylinders should be selected;
3. The cylinder needs to be protected when there is high humidity, a lot of dust, water droplets, oil stains, and welding slag;
4. Before the cylinder is connected to the pipeline, the dirt in the pipeline must be cleared to prevent debris from entering the cylinder;
5. The cut off of the cylinder should be filtered by a filter element above 40M before it can be used;
6. In a low temperature environment, measures for freezing prevention should be taken to prevent the water from sealing the system;
7. Avoid side load, otherwise the piston rod will easily deform and damage the thread. The single action type cannot load in return;
8. If the cylinder is not used for a long time after the removal, attention should be