Feature

●The shell is made of ground 4S material, durable and not easy to damage
●With dust-proof and waterproof structure, it has good durability under the conditions of cooling liquid and iron filings flying
●No built-in amplifier required, no deviation due to temperature and power supply voltage fluctuations of the part where the tool is located, can be directly input to the NC and program (PLC)
●Alarm signal can be sent when overtravel
●The sharpness corner of the tool directly contacts the tip of the tool related to the machining size, and its position, size, and output signal are measured, with high accuracy.


Description

Feature:

1. With dust-proof and waterproof structure, it has good durability under the conditions of cooling liquid and iron filings flying
2. No built-in amplifier required, no deviation due to temperature and power supply voltage fluctuations of the part where the tool is located, can be directly input to the NC and program (PLC)
3. Alarm signal can be sent when overtravel
4. The sharpness corner of the tool directly contacts the tip of the tool related to the machining size, and its position, size, and output signal are measured, with high accuracy.
5. The shell is made of ground 4S material, durable and not easy to damage

Spec:

ItItem Type: Automatic Tool Setting Gauge

Output Mode: B: NO (normally open)
Stroke: 5mm
Repeatability: 0.001mm
Electric Shock Life: 3 million times
Protection Structure: IP67
Contact Force: 1.5N
Material of the Contact Area: Hard-bonding
Housing Material: Ground 4S
Protection Tube: 1 meters minimum bending radius R25
Cable: 5 meters oil resistant 6-core
Electrical Aspects:
1. Contact rating DC24V ± 10% 20mA (maximal)
2. When the body of the machine is grounded, use the tool setter to install it on the side of the ground wire.
3. For the tool setting instrument with LED, pay attention to the connection (+) (-) when connecting. Recommended value is 10mA, resistance load.
4. For the output structure when the interface unit is attached, please read the user manual

Package List:

1 x Automatic Tool Setting Gauge

Notice:

1. Please control the tool setting speed at 50 ~ 200mm / min

2. Operating ambient temperature range: 0 ℃ ~ 80 ℃

3. Please control the voltage at DC24V and the current below 20mA