Feature

●【Product Overview】Combination of warning light and horn allows transmission of visual and audible signals together.Need wiring, voltage is DC10V-30V, customized voltage support.
●【Audible Alert】The siren volume up to 120dB, built-in 9 alarm tones. The tone volume can be adjusted by the remote controller, and the voice can be updated through the Micro USB port. User-Defined Voice pls contact us.
●【Visual Alarm】The siren light uses LED flashing to alarm, and there are four flashing modes: high frequency flicker, low frequency flashing, left and right flashing, and rotation, which can be adjusted by the remote control. Default lampshade is red, if you need other colors, please contact us.
●【Outdoor tool】The alarm siren adopts weatherproof circuit design, ABS base, PC lampshade, and the protection level is IP65, which can be used outdoor with confidence.Default bolt base, need magnetic base please contact us
●【About YASONG】YASONG ALARM is a professional manufacturer of Beacon Light. Our products is Widely Used For forklift, Automation Equipment, Machinery, AGV, Safety Door, Etc.If you need more functions and higher power alarms or solutions, please contact us.


Description

Switch different modes of alarm light through mode key of remote control

flashing lights modeflashing lights mode

flashing lights modeflashing lights mode

flashing lights modeflashing lights mode

flashing lights modeflashing lights mode

high-frequency flashing

Rotating flash

Left and right cyclic flashing

Left and right cyclic flashing

Adjust volume and toneAdjust volume and tone

  • Remote control distance: 10mter/32.8ft
  • Adjustable siren light volume: 0-120dB
  • Four flash modes are available
  • he alarm light has 9 built-in alarm tones and you can adjus the alarm tone through the remote control

LED lamp beadLED lamp bead

Siren strobe light consists of 70 LED beads, high brightness, long use time

Install methodInstall method

Strobe light bolt base mount for easy installation

Note:

  • The voltage of the warning light is DC10-30V, if the voltage is connected wrongly, the warning light will be burnt out!
  • The red wire of the strobe light is connected to the positive , and the black wire is connected to the negative, if it is connected to the opposite, the warning light will be burned out!

USB portUSB port

The truck warning light has an internal USB port so you can upload your own favorite tones!

ApplicationApplication

Product information