Feature
●EASY WIRING: Equipped with copper cable, U shaped terminal, convenient for you to wire and control your equipment.
●FINE WORKMANSHIP: This industrial remote control hoist controller has power monitoring function, and displays the power status with LED indicator, 800MHz transmission frequency, strong anti interference ability.
●ABS SHELL: The shell of the remote control is made of premium ABS material, which is waterproof, oil proof, drop proof, acid proof, providing the product with a long life span.
●WIDE APPLICATION: Our remote control crane controller is suitable for cranes, conveyors, coal mining equipment, concrete pumps and other mechanical equipment.
●IDEAL REPLACEMENT: This electric hoist controller receiver set has strong anti-interference ability, sensitivity and stability, and is an ideal choice for replacing old parts and damaged parts.
[24V]
Description
How to Use:
Remote controllers and transmitters of the same series and model can be replaced at will as follows:
1. Put the new transmitter without battery, and the receiver must not be powered on.
2. Remove the data U disk from each receiver.
3. Insert the small U disk.
4. When the battery is installed, the indicator light flashes three times, the data has been copied to the new transmitter, and it can be used normally.
5. With the receiver, insert the small U disk according to the direction, the red light flashes three times, and it can be used normally after plugging in the power supply.
Specification:
Item Type: Remote Control
Material: ABS, Copper
Remote Control Battery: AA alkaline battery x 2 (Delivery Without Battery)
Application: Crane, Conveyor, CNC, Coal Mining Machinery, Generator Start, Concrete Pump, Grab Bucket, Other Machinery
Package List:
1 x Remote Control
1 x Receiver
2 x Dust Jacket
2 x Fuse
Note:
1. After use, the main power of the crane should be turned off, and the power of the receiver should be cut off.
2. Press the reset emergency stop button of the transmitter, and place the transmitter in a safe place. Personnel should not press it randomly to avoid accidents.
3. The crane should have the main power relay, limit switch, and other safety facilities
4. Stop using it in case of lightning strike or interference
5. During installation and maintenance, the main power supply of the crane and the power supply in the receiver should be turned off to avoid electric shock.