Feature
●Good Performance: Using excellent heating elements, the wind is natural and soft, the heat distribution of the tuyere is even, easy to adjust, and the temperature and air volume can be precisely controlled.
●Portable Design: LCD display hot air temperature, digital thermostat, the operator can observe more intuitively, and it is handy for blowing and welding.
●Applicable Scenes: This hot air gun kit is suitable for soldering and desoldering of most surface mount parts, such as SOIC, CHIP, QFP, PLCC, BGA, etc., convenient and practical.
●Safe Operation: The soldering method that does not need to contact the solder joint can avoid the displacement and thermal shock of the parts, and different nozzles can be used.
●Desoldering Tools: Commonly used for desoldering various shielding box, covers on circuit board, shrinkable heat shrinkable tube, PVC films and polyethylene for connecting metal, etc.
[US Plug 110V]
Description
Specification: Item Type: Portable Hot Air Gun Working Current: 2.5A Power: 450W Working Environment Temperature: 450℃ Package List: 1 x Heat Gun,1 x Bracket,2 x Tweezers,6 x Blue Auxiliary,1 x Solder Absorber,3 x Air Nozzles,3 x Screws,3 x Nuts,3 x Accessories,2 x Screwdrivers,4 x Accessories,1 x Suction Cup,1 x User Manual Note: 1. Please unplug the power cord after the machine is finished working. 2. The parts approved or recommended by the original factory must be used. 3. Machine failures must be repaired by professionals. 4. After the hot air gun is turned on,its temperature may reach above 400℃.Do not use it near flammable and explosive gases and objects.Do not touch the heating pipe or spray the hot air directly on the human body. 5. Please ensure that the hot air gun is in a safe state before turning on the hot air gun,and the operator must not leave the workplace after the hot air gun is turned on. 6. When installing the nozzle,it is not allowed to open the hot air gun. It must be installed after the heating pipe and the nozzle are cold cut. 7. Please keep the inlet and outlet air outlet of the machine unblocked,and there should be no blockages. 8. After use,remember to cold cut the body, put the welding torch back on the bracket,and turn on the machine after going to sleep. 9. It should be handled with care, and do not vibrate strongly or strike the heating torch. 10. There will be smoke during welding, please make proper ventilation facilities. 11. Before shutting down the hot air gun,please lower the temperature and increase the wind speed to lower the temperature of the heating core, which can prolong the service life of the hot air gun.It can be turned off when the temperature reaches 100.