Magneto Generator Engine Stator Coil Fit for Honda VFR400 VFR 400 NC21 NC24 NC30 NC35 1985-1996
Dimensions :
Interior diameter : 47mm / 1.85 inches
Exterior diameter : 112mm / 4.42 inches
Poles Thickness : 28.4mm / 1.12 inches
Poles Width : 18mm / 0.70 inches
Other specifications :
Number of wires: 3
Number of pins: 3
Number of plugs: 1
Number of fixation holes: 5(+1)
Number of poles: 18
PART NUMBER(S):
31120-MR8-781
FITMENT:
for Honda RVF400 NC35 1994-1996
for Honda VFR400 R3K/R3N (NC30) 1989-1992
for Honda VFR400 R3L/R3M (NC30) 1990-1991
for Honda VFR400 NC21 1985-1987
for Honda VFR400 NC24 1987-1988
PACKAGE INCLUDED:
1x Generator Stator Coil
NOTICE:
Before installing your new stator
Check the AC output of the stator.
Replace any burned or corroded connectors on stator and regulator/rectifier.
Check and repair any melted wiring.
Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation.
All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.