Specification:
Item Type: For FPV Receiver Monitor
Product Material: Plastic, LCD, Electronic Components
Voltage Property: 100-240V
Screen Size: 7 Inches
Display Ratio: 16:9
Video Delay Time: Less Than 20ms
Screen Type: TFT LCD Screen / Life, LED Backlight
Resolution: 800 x 480
Brightness: 600 cd/㎡
Brightness: 300 cd/㎡ with High Brightness Backlight LED
Viewing Angle: 140/120 Degrees (Horizontal/Vertical)
Operating Voltage: DC7-16V
Battery: 7.4V 2000mAH Lithium Battery (Built In)
Power Consumption: 650mA at 12V (Maximum)
Battery Charging Current: 850mA at 12V (Maximum)
Normal Mode: Device Working Current is 400MA, Voltage is 7.4V
Recording Mode: Device Operating Current is 620MA, Voltage is 7.4V
Built In Battery: Maximum Charging Current 800MA
Operating Temperature: -10℃ to +65℃
Connector: RP-SMA Female (External Pin)
Antenna Connector: 2 X RP-SMA Male (Inner Hole)
Recording Size: VGA/D1/HD (Optional)
Recording Sound: On / Off (Optional)
Recording Time: OFF / 3min / 5min / 10min (Optional)
Frame Rate: 30 Fps
Maximum Support: 32G, C10 Storage Card (Sold Separately)
Compression Format: MJPEG
Recording File Format: AVI
Language: English , German , French , Spanish , Italian , Chinese , Russian , Japanese
Power Adapter: DC12V / 2A (DC3.5 Interface)
DVR Module On: Each Full Charge to Restore About 3 Hours of Operating Time
DVR Module Off: Each Time a Full Charge to Restore About 4 Hours of Operating Time
Operating Status OSD Display: Rssi Indication, Power Indication, Channel Indication
Applicable to for FPV Uav Quadcopter
Band and Channel Selection:
Band
CH1
CH2
CH3
CH4
CH5
CH6
CH7
CH8
A 5865 MHZ 5845 MHZ 5825 MHZ 5805 MHZ 5785 MHZ 5765 MHZ 5745 MHZ 5725 MHZ
B 5733 MHZ 5752 MHZ 5771 MHZ 5790 MHZ 5809 MHZ 5828 MHZ 5847 MHZ 5866 MHZ
C 5705 MHZ 5685 MHZ 5665 MHZ 5645 MHZ 5885 MHZ 5905 MHZ 5925 MHZ 5945 MHZ
D 5740 MHZ 5760 MHZ 5780 MHZ 5800 MHZ 5820 MHZ 5840 MHZ 5860 MHZ 5880 MHZ
R 5658 MHZ 5695 MHZ 5732 MHZ 5769 MHZ 5806 MHZ 5843 MHZ 5880 MHZ 5917 MHZ
How to Use:
1. A AV OUT: A receives AV signal output, must be in A mode.
2. B AV OUT: B receives AV signal output, must be in B mode.
3. DIVERSITY AV OUT: DIVERSITY received AV signal output, must be in DIVERSITY mode.
4. DC/+12V DC IN, +12V power supply, device operating current 650mA at 12V, built in battery maximum charging current 800mA at 12V; If the device works while charging, please note that choose a charging device with rated current greater than 2A/12V.
5. Battery built in 7.4V 2000mAH high capacity lithium polymeride battery. When the battery is charging, the unit marked with the battery in the lower left corner of the device will light up when charging is complete, here is a bright green LED; If not used for a time, please charge the device once every four months to preserve the battery.
Package List:
1 x For FPV Receiver Monitor2 x 5.8G Antenna
2 x AV Cable
1 x Charger
1 x US Plug
1 x Storage Bag
1 x Manual
1 x Cleaning Cloth
or
1 x For FPV Receiver Monitor2 x 5.8G Antenna
2 x AV Cable
1 x Charger
1 x EU Plug
1 x Storage Bag
1 x manual
1 x Cleaning Cloth
Note:
1. Please allow 1?3mm error due to manual measurement.
2. Due to the difference between different monitors, the picture may not reflect the actual color of the item.
3.Can\t receive 2 different channels at the same time.