Q: How do I install an Oxygen Sensor?
A: Sensor installation will ?rst require the proper tools. A specialty oxygen sensor socket is recommended for removal of the old sensor and installation of a new sensor.
1. Disconnect the battery.
2. Disconnect wiring harness from the old sensor.
3. Remove any hardware or clips if applicable.
4. Use the oxygen sensor socket (shown below) to remove the old sensor.
5. Apply anti-seize compound to the threads of the sensor(if not already pre-applied).
6. Use specialty socket to install the new sensor to the recommended torque.
7. Put in place any hardware or clips if applicable.
8. Connect the wiring of the new sensor to the existing vehicle wiring.
9. Reconnect the battery.