Feature

●Jumper A, B are used to control audio effect of bass range. A for lower limit while B for limit of the bass audio range. For speakers, when Bass is turned up too much, the speaker will show distortion.
●When that happens: we the jumper cap of jumper A to limit super low Bass to bring distortion lower. When we the cap of jumper B, Bass is increased while cap of Jumper B is on, Bass is decreased. Jumper C and D are used to control range. When cap of both jumper C and D are on, the sound of is loudest.
●When only cap C is on, the sound is lower. When only cap D is on, further lower. When both of C and D are removed, there is no sound. (Generally speaking, with the four , youd sooner or later find your best sound effect. Anywya, all effects still on your actual .)


Description

acrosser How to use the splitter board:
First connect as per above (, Low, Input), connect to speaker, seal air , begin to hear music while optimize.
Normally we use jumper A and let B idle. For jumper C and D: we need to hear the actual effect of . A general formula is: A+D = better Bass; A+C = clear and Bass; A+CD = clear and Bass (the overall effect inclined towards ); AB+CD = more mediant frequency. When Bass effect is unnecessarily high, cap A. optimize the sound is best, and then fix the board with your speaker unit.
Power: 400W or lower
Resistance: 4-16ohm
Frequency: Adjustable
Colour: motherboard red
Material: ABS + metal
Size: 7*5*2.5cm
Package Contents:
1 * Frequency Divider