Feature

●The inductor is made of oxygen-free copper wire. The subwoofer coil uses 1.2MM diameter. The capacitor uses bennic non-polarity capacitors in parallel.
●The role of the divider:The divider is also called the splitting board, which is usually installed in the speaker shell; the function is to divide the total frequency signal from the power amplifier, divide the high-frequency signal into the tweeter unit, and divide the bass signal into the woofer unit.
●How to identify the divider is good: In addition to its own circuit design to be reasonable, the material is the larger the copper wire of the coil, the better, to use oxygen-free copper wire; the higher the voltage resistance of the capacitor the better, to use no sense Capacitors


Description

Description
The inductor is made of oxygen-free copper wire. The subwoofer coil uses 1.2MM diameter. The capacitor uses bennic non-polarity capacitors in parallel.
The role of the divider:The divider is also called the splitting board, which is usually installed in the speaker shell; the function is to divide the total frequency signal from the power amplifier, divide the high-frequency signal into the tweeter unit, and divide the bass signal into the woofer unit.
How to identify the divider is good: In addition to its own circuit design to be reasonable, the material is the larger the copper wire of the coil, the better, to use oxygen-free copper wire; the higher the voltage resistance of the capacitor the better, to use no sense Capacitors.
Parameters:
Model: Subwoofer Crossover
Size (L*W*H): 115*91*45MM
Frequency points: 150HZ/4 ohm, 300HZ/8 ohm(that is, bass horns work at frequencies below 150 Hz when operating at 4 ohm, and horns work below 300 Hz when operating at 8 ohm).
Power: 260W(Available below 260W for 12 inch and 15 inch small power speakers).
Impedance: 4~8
Circuit: Bass standard 12db/oct.
Package included:
1*Crossover