Feature

●Compatible with All Traeger wood pellet grill models (except PTG).
●Eight cook temperature settings from 180℉ to 375℉ (up to 450℉). You can choose the best barbecue temperature easily, which could meet your various needs.
●Three Different Modes: smoke mode, temperature mode and high mode.
●An easy-to-read LCD display shows the exact cooking temperature inside your grill. You can read it directly under the sunlight through our digital temperature controller kit.
●Come with thermostat controller board, 7” RTD temperature sensor and hot rod ignitor. Easy installed with standard plug-in connectors.


Description

Installation Instructions:
1. Unscrew the old panel. Unscrew the bottom screws of the hopper( front and back). Cut all the ties binding the wires. Unplug all the wires. Remove the old panels.
2. Feed the RTD wires through the holes on the left side of the grill into the bottom of the hopper and into the hole where the panel is supposed to be attached and screw RTD wires to the green terminal block.
3. Install the RTD (Temperature Sensor ROD) located inside of the grill.
4. Plug all the wires into it proper cable connections.
5. Use zip ties tie to bundle loose cords.
6. Screw on the bottom grate.
7. Screw and tighten the new digital control.

Features:
* Compatible with all Traeger wood pellet grill models (except PTG).
* Bright LCD display shows exact cooking temperature.
* Eight cook temperature settings, 180℉ through 375℉ (up to 450℉).
* Three Different Modes: smoke mode, temperature mode and high mode.
* Come with 7” RTD temperature sensor, easy to install.
* Front panel cook control, cool down cycle, for safe, succulent grilling.

Package includes:
1x Thermostat Controller Board
1x RTD Temperature Probe
1x Hot Rod Ignitor
1x Fuse
5x Fixing Bands