How to operate and maintain quicksand painting
1. There is no need to adjust the product after receipt! Just flip it back and forth a few times
2. Due to changes in temperature and air pressure, sometimes you need to adjust the air and water in the quicksand painting
3. Specific operation: The art of quicksand is the natural balance of water, sand and air. The height of the air layer varies depending on the size of the product. When the height is between 0.5CM and 2CM, the sand will have a better flow rate
Quicksand falls too slowly; just pull out some air
1. Each quicksand painting can use a disposable syringe to adjust the air and water in the quicksand painting
2. Specific operation: Gather the air bubbles together (the circular quicksand painting needs to concentrate the air bubbles in the hole, and make sure that the sand moves away), and then insert the syringe into the air hole to draw out the air
Quicksand falls too fast; add some air
The same as the above method, gather the air bubbles together (the circular quicksand painting needs to concentrate the air bubbles in the hole, and make sure that the sand moves away), and then insert the syringe into the air hole to inject air
If many small bubbles in the quicksand painting become a particularly large bubble, there are two solutions
1. Shake the quicksand painting to disperse the large air bubbles and turn them into small air bubbles
2. An appropriate amount of water can be added to supplement the evaporation of water
Precautions for water injection of quicksand paintings
- Be sure to use pure water or cooled boiled water
- As above, draw out some air and empty the syringe barrel
- Use a syringe to draw in and add an appropriate amount of water to prevent excessive pressure and glass breakage
Unfortunately, syringes and needles are medical equipment and dangerous goods, and we cannot provide you with them.
Warning: This product is glassware. Children under 8 years old should not be used alone. It can only be used under adult supervision.
Note:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. Please allow 1-2cm error due to manual measurement. Thanks for your understanding.