Feature

●? 100% SATISFACTION GUARANTEE OR MONEY BACK:Settings and marking techniques may vary depending on the laser and metal product being marked. We can usually resolve most marking issues with simple setting adjustments. Please feel free to contact us directly.
●? HOW TO APPLY: Shake well, Spray 6-8 inches from the substrate surface, apply a thin coat using left to right motion, as long as you do not see through the surface, do not have to overspray.Use the suggested laser settings in our FAQ section as a starting guide line or feel free call our Technical Support Team.
●? BEST VALUE: Proven Anti-Clog, nanoparticle-technology of Brilliance Laser inks that allows 25% more coverage surface area than competition, with a thin coat spray (may need some practice initially).Hence more profits and less spend!!
●? GENERAL GUIDELINES/SETTINGS: Scan QR CODE on product label to see our suggested laser settings in our FAQ section of our website. CO2 LASER - 25 Watt Minimum Required (100% P / 15-30% S / 500-700 DPI). FIBER LASER - 10 Watt Minimum Required (@ 10 Watt PWR / 50 mm/sec / 80-500 Q-Freq. / DPI- 0.1mm Hatch) Low watt Diode Lasers are not recommended.
●? MULTI PACK DISCOUNT: Get more discount (SAVE with our bundle options, check out our listings with multi packs. Also available in Powder form.


Description

AerosolAerosol

Product Key Features

PermanentPermanent

High contrastHigh contrast

Heat resistantHeat resistant

DurableDurable

Why Brilliance Laser Inks?

AerosolsAerosols
  • Shake & spray application
  • Easy to apply. Easy to wash off.
  • Anti-Clog Technology
  • Permanent Mark
  • Quick to dry
  • Marks on various metals
  • Up to 4,000 square inch of coverage
  • Works with CO2 and Fiber Laser Nd:YAG Laser Systems

Laser marking made easy with our Aerosol Spray (in 2 oz & 12 oz)

Exceptionally adaptable laser marking inks to create high quality permanent mark on a various metal surfaces.

With just a shake and a spray, conveniently make a permanent mark on your metal substrate with our aerosol spray. It comes in two sizes: 2 oz. and 12 oz to fit your needs.

Note that this product does not include any alcohol in the package. Below application tutorial is for instructional purposes only.

How To Apply Aerosols

Aerosol-Step1Aerosol-Step1

Aerosol-Step2Aerosol-Step2

Aerosol-Step3Aerosol-Step3

Aerosol-Step4Aerosol-Step4

Step 1

Clean the substrate with denatured alcohol so its free of any dirt and oil.

Shake the bottle well for approximately 2 minutes to make sure that all contents are mixed.

Step 2

Hold the bottle at 45° degrees and spray 6-8 inches from the substrate surface using left to right motion. Apply a thin coat as long as you do not see through the surface.

Wait for the mixture to dry completely or use a hair dryer to dry it in seconds.

Step 3

Adjust and focus your laser settings according to the material and make your mark!

You may refer to the table below on Suggested Laser Machine Settings.

Step 4

No waiting time needed to wash off! Rinse with tap water or wipe with a wet cloth.

Voila! You now have a permanent on a finished product.

Suggested Settings for CO2 and Fiber LasersSuggested Settings for CO2 and Fiber Lasers
Aerosol black metal laser ink marking spray 1 2 4 Powder-1
Brilliance Laser Inks Black Aerosol Spray Brilliance Laser Inks Brown Liquid Ready Brilliance Laser Inks Powder (50 g) Brilliance Laser Inks Powder (250 g) Brilliance Laser Inks Powder (500 g)
Brush Coverage (approx.) 500 sq. in. 1,000 sq. in. 5,000 sq. in. 10,000 sq. in.
Spray Coverage (approx.) 4,000 sq. in. 1,000 sq. in. 2,000 sq. in. 10,000 sq. in. 20,000 sq. in.
Colors Black, Red (Copper) Black, Red (Copper) Black Black Black
Preval Ready ?