Introduction:

1.While measuring the radius of arc,measuring it using "R" gages commonly,but application range of "R" gages is limited,because it only measure standard radius of arc,and getting data from comparison measurement,so cant getting accurate data of workpiece.Multi-indicators can measure random radius of arc,apply for measurement radius of arc and plastic mould manufacturing.

2.Multi-indicators have five different length measuring jaws,for choose corresponding measuring jaws,while measuring arc face.

3.Multi-functions 1)Application as indicators 2)Outside measurement 3)Inside measurement 4)Depth measurement 5)Step measurement

Feature:

1.Hard aluminum alloy alloy probe.compact and firm structure.

2.Large-screen LCD display, fast and convenient reading.

3.Inch/Metric Conversion: Switchable between mm and inch.

4.The data connection port can be connected to the computer to output data, which is convenient and quick.

5.With 5 Interchangeable Measuring Jaws: 10mm/20mm/30mm/60mm/100mm. can both measure Outer & Inner Radius of arcs

Specification:

Measuring range:linear o-13mm,

Radius:5-9999.9mm

Linear deviation: ΔS≤0.02mm

Radius deviation: ΔR≤(0.02／2 )R

Power:3V Li battery(CR2032)

Workable temp:0±40℃

Storage temp: ?20℃±60℃

Humidity:comparatively≤80％

Operations:

1.Power on Short pressing key:ZERO/ON/OFF

2.Zeroset Short pressing key:ZERO/ON/OFF,can zeroset at any locations.Before inside measurement and outside measurement,make three spindles lie a same plane,then pressing key:ZERO/ON/OFF.

3.Inch,Metric Pressing key:UNIT,can inch/metric changeover.

4.Data hold and release Pressing key:HOLD,the LCD will display “H”,instrument hold data.

5.Functions changeover Pressing key:MODE,can select measuring functions:inner acr,outer acr,length,depth,step.When first row of the LCD display “R1”,the instrument enter inner arc measurement.When first row of the LCD display “R2”,the instrument enter outer arc measurement.Third row of the LCD display:length,depth,step. Note: “R1” and “R2” can auto-changeover.

⑥Replace Jaws Select suitable measuring jaws according to workpiece size.Measuring jaws specifications:10,20,30,60,100,after replace measuring jaws,press key:C,make the LCD display number=measuring jaws size.Example:If select 30 measuring jaws,then the LCD should display“C=30”.

Measuring Operations:

Inside arc the best measuring range

C=10 R=5 --> 13MM

C=20 R=11--> 30MM

C=30 R=22-->100MM

C=60 R=94-->260MM

C=100 R=255-->700MM

Outside arc the best measuring range

C=10 R=6.5 --> 15MM

C=20 R=14--> 30MM

C=30 R=27-->100MM

C=60 R=94-->260MM

C=100 R=255-->700MM

Power off long pressing key:ZERO/ON/OFF,or auto power off after several minutes.