Feature

●Super Quiet. Compatible with Creality Ender 3, Ender 3 Pro, Ender 3 V2, Ender 5 3D printer. PLEASE NOTICE: It only plug and play for Ender-3 & Ender 3 Pro. If you want to install it on Ender-5, please flash Ender-5 firmware. You can download firmware from official website.
●Driver - TMC2225 driver & Creality V0.0.6 firmware ( based on Marlin 2.0.1) for V4.2.7 board. Bootloader has been preinstalled.
●Update Firmware - Please copy the firmware file to a formated SD card with no other files in it. Turn off the printer and unplug the power cord. Insert the SD card & power cord, and turn on the printer. Wait 10s to complete the firmware updating process.
●Thermal runaway protection is enabled. The Board is Optimized by Circuit, effectively solve the Heating Problem.
●Any issues or questions about our product please feel free to contact us at any time. We have professional technical Team to provide technical supports for you as soon as we can.

[Black]




[Green]





Description

11

SPECIFICATIONS:

  • Version: V4.2.7
  • Voltage: 24V Input/12V Output
  • Firmware: V0.0.6/V1.0.6 based on Marlin 2.0.1 ( You can copy the firmware file to a formated SD card with no other files in it. Turn off the printer and unplug the power cord. Insert the SD card & power cord, and turn on the printer. Wait 10s to complete the firmware updating process.)
  • Motor Driver Stepper: TMC2225
  • TMC2225 drivers, Marlin 2.0.1 and bootloader has been pre-installed.
  • Support 24V input voltage. With USB Port, can be Worked With E/Z/Y/X Axis Motor.

22
44
66
55

IMPORTANT NOTES:

  • For ender 3/ ender 3 pro printer, just plug in and start printing.
  • For ender 3 v2/ender 5, please update firmware at first. If you have any other issues with the firmware updating, you can refer to the firmware flash videos available on Creality official website.
  • If it starts beeping and does not show anything on the screen when you turn it on, you have to update the firmware and check your wiring at first.
  • There are three version codes about the mainboard, V4.2.7, it is a Serial Number Named by Creality, V2.0.1 is the serial number of Marlin firmware, V0.0.6 is the version number of the firmware Creality upgraded based on Marlin 2.0.1, As long as the motherboard is version 4.2.2/4.2.7, the firmware is Marlin 2.0 or higher.